Toyota Tundra. Manual — part 2038
b
Install the oil pan with the 14 bolts and 2 nuts
Fig. 337: Identifying Seal Packing Areas On No. 1 Oil Pan Sub-Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Torque: for bolt A
10 N*m (102 kgf*cm, 7 ft.*lbf)
for bolt B
35 N*m (357 kgf*cm, 26 ft.*lbf)
for nut
35 N*m (357 kgf*cm, 26 ft.*lbf)
NOTE:
Do not start the engine for at least 2 hours after installing.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 338: Locating Oil Pan Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
9
INSTALL NO. 2 OIL PAN SUB-ASSEMBLY
a
Apply seal packing in a continuous line as shown in the illustration
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Seal packing: Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent
Standard seal diameter: 3.0 to 4.0 mm (0.118 to 0.156 in.)
NOTE:
Remove any oil from the contact surface.
Install the oil pan within 3 minutes and tighten the bolts and nuts within
15 minutes after applying seal packing.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст