Toyota Tundra. Manual — part 2036

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)

Fig. 332: Locating Oil Drain Pipe With Mounting Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

5

INSTALL ENGINE REAR OIL SEAL RETAINER

a

Apply seal packing in a continuous line as shown in the illustration

Seal packing: Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FE) - Tundra

Seal diameter: 2.0 to 3.0 mm (0.0787 to 0.118 in.)

Application position from inside edge of retainer: 3.5 mm (0.138 in.)

Fig. 333: Identifying Seal Packing Areas On Engine Rear Oil Seal Retainer

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FE) - Tundra

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b

Install the oil seal retainer with the 6 bolts

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTE:



Remove any oil from the contact surface.



Install the engine rear oil seal retainer within 3 minutes and
tighten the bolts and nuts within 15 minutes after applying seal
packing.

NOTE:



Do not start the engine for at least 2 hours after installing.



When installing the oil seal retainer, make sure the lip of the oil seal is n

damaged.



When installing the oil seal retainer, make sure the lip of the oil seal is n

folded incorrectly.

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FE) - Tundra

6

INSTALL OIL STRAINER SUB-ASSEMBLY

Fig. 334: Locating Oil Seal Retainer Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FE) - Tundra