Toyota Tundra. Manual — part 2240
HINT:
Arrange the removed parts in the correct order.
39. REMOVE VALVE LASH ADJUSTER ASSEMBLY
a. Remove the 32 valve lash adjusters from the cylinder head.
HINT:
Arrange the removed parts in the correct order.
40. REMOVE VALVE STEM CAP
a. Remove the 32 valve stem caps from the cylinder head.
HINT:
Arrange the removed parts in the correct order.
41. REMOVE CYLINDER HEAD SUB-ASSEMBLY LH (See REMOVAL )
42. REMOVE CYLINDER HEAD SUB-ASSEMBLY RH (See REMOVAL )
43. REMOVE CYLINDER HEAD GASKET LH
44. REMOVE CYLINDER HEAD GASKET RH
45. REMOVE CYLINDER BLOCK WATER JACKET SPACER
a. Remove the 2 water jacket spacers from the cylinder head.
NOTE:
Be sure to remove the water jacket spacers. If not, they may fall and
become damaged when the cylinder block is inverted.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Fig. 278: Locating Water Jacket Spacers On Cylinder Head
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
46. REMOVE VENTILATION PIPE GASKET
a. Using a screwdriver, pry out the ventilation pipe gasket.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
HINT:
Tape the screwdriver tip before use.
Fig. 279: Removing Ventilation Pipe Gasket
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
47. REMOVE NO. 1 HEAT EXCHANGER COVER
a. Remove the 12 bolts and 2 nuts.
Fig. 280: Locating No. 1 Heat Exchanger Cover Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст