Toyota Tundra. Manual — part 155
1. PRESS "EJECT" AND CHECK OPERATION
a. Press the CD EJECT switch of the radio receiver for 2 seconds or more and check that the CD is
ejected.
OK: CD is ejected.
Result:
RESULT REFERENCE
B: REPLACE RADIO RECEIVER (see REMOVAL )
C: REPLACE RADIO RECEIVER (see REMOVAL )
A: Go to Next Step
2. REPLACE CD WITH ANOTHER AND RECHECK
a. Insert another CD and check if it is ejected.
OK: CD is ejected.
Result:
RESULT REFERENCE
B: REPLACE RADIO RECEIVER (see REMOVAL )
C: REPLACE RADIO RECEIVER (see REMOVAL )
A: END
CD CANNOT BE INSERTED / PLAYED OR CD IS EJECTED RIGHT AFTER INSERTION
INSPECTION PROCEDURE
1. CHECK IF A PROPER CD IS INSERTED
a. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not
Result
Proceed to
OK
A
NG (for Column Shift Type)
B
NG (for Floor Shift Type)
C
Result
Proceed to
OK
A
NG (for Column Shift Type)
B
NG (for Floor Shift Type)
C
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
deformed, flawed, stained, burred, or otherwise defective.
OK: Normal CD.
HINT:
Translucent or uniquely-shaped CDs cannot be played.
CDs with adhesive paper labels should not be played.
Commercial audio CDs can be played.
CD-DA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
MP3 and WMA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
For details on playable CDs, refer to the Owner's Manual.
NG: CHANGE DISC
OK: Go to Next Step
2. CHECK THAT CD IS INSERTED PROPERLY
a. Check whether or not the CD is inserted upside down.
OK: CD is properly inserted.
NG: INSERT CD PROPERLY
OK: Go to Next Step
3. CHECK CD
a. Clean the disc by wiping it with a soft cloth from the inside to the outside in a radial direction.
OK: Malfunction disappears.
NG: Go to step 4
NOTE:
Do not use a conventional record cleaner or antistatic preservative.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 53: Cleaning Disc Surface With Soft Dry Cloth
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: END
4. REPLACE CD WITH ANOTHER AND RECHECK
a. Replace the CD with a normal one and check that the malfunction disappears.
OK: Malfunction disappears.
Result:
RESULT REFERENCE
B: REPLACE RADIO RECEIVER (see REMOVAL )
C: REPLACE RADIO RECEIVER (see REMOVAL )
A: END
CD SOUND SKIPS
INSPECTION PROCEDURE
1. CHECK CD
a. Check the CD.
OK: The CD is clean.
HINT:
If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial
direction.
NG: CLEAN CD
Result
Proceed to
OK
A
NG (for Column Shift Type)
B
NG (for Floor Shift Type)
C
NOTE:
Do not use a conventional record cleaner or antistatic preservative.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 54: Cleaning Disc Surface With Soft Dry Cloth
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
2. CHECK CD
a. Check that the CD is not deformed or cracked.
OK: No deformation or cracks on the CD.
NG: CHANGE DISC
Fig. 55: Checking Disc For Deformed Or Cracked
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
3. CHECK OPERATION USING ANOTHER CD
a. Check if the problem recurs using another CD.
OK: The problem does not occur.
NG: Go to step 4
OK: END
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст