Toyota Tundra. Manual — part 608
Fig. 84: Identifying Television Camera Assembly And Tail Gate Service Hole Cover
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE TAIL GATE SERVICE HOLE COVER (See REMOVAL )
2. REMOVE TELEVISION CAMERA ASSEMBLY
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
Fig. 85: Identifying Television Camera Assembly With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
a. Disconnect the television camera connector.
b. Detach the 3 clamps and remove the 2 bolts and television camera.
INSTALLATION
HINT:
A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR
STANDARD BOLTS ).
1. INSTALL TELEVISION CAMERA ASSEMBLY
Fig. 86: Identifying Television Camera Assembly With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
a. Attach the 3 clamps and install the television camera with the 2 bolts.
b. Connect the television camera connector.
2. INSTALL TAIL GATE SERVICE HOLE COVER (See INSTALLATION )
3. CHECK TELEVISION CAMERA ASSEMBLY ANGLE
a. Move the shift lever to the R position and check the rear view image in the display has no lines or
distortion and has good color.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
Fig. 87: Identifying Rear Bumper Line In Display
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
CLEARANCE SONAR MAIN SWITCH
COMPONENTS
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
Fig. 88: Identifying Clearance Sonar Main Switch Components
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (See REMOVAL )
2. REMOVE DRIVE MONITOR SWITCH (CLEARANCE SONAR MAIN SWITCH)
a. Detach the 2 claws and remove the monitor switch.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст