Toyota Tundra. Manual — part 2363
c
Remove the 2 bolts and starter
Fig. 17: Locating Starter Mounting Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d
Remove the flywheel housing side cover
Fig. 18: Locating Flywheel Housing Side Cover
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
DISASSEMBLY
1
REMOVE MAGNET STARTER SWITCH ASSEMBLY
a
Remove the nut, and disconnect the lead wire from the magnet starter switch
Fig. 19: Locating Lead Wire Nut
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Remove the 2 nuts and magnet starter switch
Fig. 20: Locating Magnet Starter Switch Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
REMOVE STARTER DRIVE HOUSING ASSEMBLY
a
Using a T30 "TORX" socket wrench, remove the 2 bolts
b
Pull out the yoke and the starter commutator end frame assembly together with the armature
Fig. 21: Locating Starter Drive Housing Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3
REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY
a
Remove the starter pinion drive lever
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Fig. 22: Locating Starter Pinion Drive Lever
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Remove the 2 screws and end frame
Fig. 23: Locating Starter Commutator End Screws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4
REMOVE STARTER ARMATURE ASSEMBLY
a
Using a screwdriver, hold the spring back and disconnect the brush from the brush holder
b
Disconnect the 4 brushes and remove the brush holder
NOTE:
While holding down the lead wire, remove the starter commutator
end frame.
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Fig. 24: Disconnecting Brush From Brush Holder
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c
Remove the starter armature from the yoke
5
REMOVE STARTER YOKE ASSEMBLY
a
Remove the starter yoke from the starter center bearing clutch
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст