Toyota Tundra. Manual — part 2364
Fig. 25: Identifying Starter Yoke Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
6
REMOVE STARTER ARMATURE PLATE
a
Remove the starter armature plate from the starter center bearing clutch
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Fig. 26: Identifying Starter Armature Plate
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
7
REMOVE PLANETARY GEAR
a
Remove the 3 planetary gears
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Fig. 27: Identifying Planetary Gears
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSPECTION
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
1
INSPECT STARTER ASSEMBLY
a
Perform pull-in test
1
Disconnect the field coil wire from terminal C
2
Connect the battery to the magnetic switch as shown in the illustration Check that the clutch
pinion gear moves outward
If the clutch pinion gear does not move outward, replace the magnet starter switch assembly
NOTE:
The following tests must be performed for no more than 5 seconds to
prevent the coil from burning out.
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст