Toyota Tundra. Manual — part 2177

Fig. 30: Identifying No. 1 And 2 Surge Tank Stay With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

e. Install the oil baffle plate with the bolt.

Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)

Fig. 31: Identifying Bolts On Oil Baffle Plate
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

f. Attach the wire harness clamp.

g. Install the throttle body bracket with the 2 bolts.

Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)

2009 Toyota Tundra

2009 ENGINE Intake (1GR-FE) - Tundra

Fig. 32: Identifying Throttle Body Bracket Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

h. Connect the vacuum switching valve (for ACIS) connector.

Fig. 33: Identifying Vacuum Switching Valve Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

i. Attach the 2 wire harness clamps.

j. Connect the No. 1 ventilation hose.

2009 Toyota Tundra

2009 ENGINE Intake (1GR-FE) - Tundra

Fig. 34: Identifying No. 1 Ventilation Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

k. Connect the union to check valve hose.

l. Connect the purge VSV connector.

m. Connect the purge line hose.

HINT:

Install the hose so that the direction of the hose clamp is as indicated in the illustration.

2009 Toyota Tundra

2009 ENGINE Intake (1GR-FE) - Tundra

Fig. 35: Identifying Purge Line Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

n. Connect the No. 4 water by-pass hose.

o. Connect the No. 5 water by-pass hose.

p. Connect the throttle position sensor and throttle control motor connector.

2009 Toyota Tundra

2009 ENGINE Intake (1GR-FE) - Tundra