Toyota Tundra. Manual — part 614
Fig. 13: Inspecting Front Seat Adjuster Assembly LH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: Go to step 5
Battery positive (+) --> Terminal Z9-2 (SLD+)
Battery negative (-) --> Terminal 29-3 (SLD-)
Seat slides forward (A)
Battery negative (-) --> Terminal Z9-2 (SLD+)
Battery positive (+) --> Terminal Z9-3 (SLD-)
Seat slides rearward (B)
Battery positive (+) --> Terminal Z9-7 (LFT+)
Battery negative (-) --> Terminal Z9-9 (LFT-)
Seat cushion rises (C)
Battery negative (-) --> Terminal Z9-7 (LFT+)
Battery positive (+) --> Terminal Z9-9 (LFT-)
Seat cushion lowers (D)
Battery positive (+) --> Terminal Z9-6 (FRV+)
Battery negative (-) --> Terminal Z9-4 (FRV-)
Seat cushion front rises (E)
Battery negative (-) --> Terminal Z9-6 (FRV+)
Battery positive (+) --> Terminal Z9-4 (FRV-)
Seat cushion front lowers (F)
Battery positive (+) --> Terminal Z9-8 (RCL+)
Battery negative (-) --> Terminal Z9-10 (RCL-)
Seat tilts forward (G)
Battery negative (-) --> Terminal Z9-8 (RCL+)
Battery positive (+) --> Terminal Z9-10 (RCL-)
Seat reclines (H)
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
OK: REPLACE FRONT POWER SEAT SWITCH LH (see REMOVAL )
5. CHECK HARNESS AND CONNECTOR (FRONT POWER SEAT SWITCH LH - POSITION
MOTOR)
a. Disconnect the Z9 switch connector.
b. Disconnect the Z3, Z4, Z5 and Z6 motor connectors.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance
FRONT POWER SEAT SWITCH LH - POSITION MOTOR
Tester Connection
Condition Specified Condition
29-2 (SLD+) - Z3-1
Always
Below 1 ohms
Z9-3 (SLD-) - Z3-2
Z9-6 (FRV+) - Z4-1
Z9-4 (FRV-) - Z4-2
Z9-7 (LFT+) - Z5-2
Z9-9 (LFT-)-Z5-1
Z9-8 (RCL+) - Z6-2
Z9-10 (RCL-)-Z6-1
Z9-2 (SLD+) - Body ground
Always
10 kohms or higher
Z9-3 (SLD-) - Body ground
Z9-6 (FRV+) - Body ground
Z9-4 (FRV-) - Body ground
Z9-7 (LFT+) - Body ground
Z9-9 (LFT-) - Body ground
Z9-8 (RCL+) - Body ground
Z9-10 (RCL-)-Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
Fig. 14: Identifying Front Power Seat Switch And Power Seat Slide Position Motor Connector
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE FRONT SEAT ADJUSTER ASSEMBLY LH (see REMOVAL )
6. INSPECT FUSE (FR P/SEAT LH)
a. Remove the FR P/SEAT LH fuse from the main body ECU.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
FUSE (FR P/SEAT LH)
NG: REPLACE FUSE
OK: Go to next step
7. INSPECT FRONT POWER SEAT LUMBAR SWITCH
a. Remove the switch (see REMOVAL ).
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
FRONT POWER SEAT LUMBAR SWITCH
Tester Connection Condition Specified Condition
FR P/SEAT LH fuse Always
Below 1 ohms
Tester Connection Switch Condition Specified Condition
3 (B) - 4 (H)
HOLD
Below 1 ohms
1 (R) - 2 (E2)
1 (R) - 2 (E2)
OFF
4 (H) - 5 (E)
1 (R) - 3 (B)
RELEASE
4 (H) - 5 (E)
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст