Toyota Tundra. Manual — part 211
for RH
TESTER CONNECTION SPECIFIED CONDITION
Fig. 208: Checking Harness And Connector (Stereo Component Amplifier - Rear No. 2 Speaker)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE STEREO COMPONENT AMPLIFIER (see REMOVAL )
14. INSPECT REAR NO. 1 SPEAKER
a. Disconnect the O1 and O7 speaker connectors.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
Tester Connection
Condition Specified Condition
K16-10 (RR+) - O2-3 (+TW)
Always
Below 1 ohms
K16-4 (RR-) - O2-1 (-TW)
K16-10 (RR+) - Body ground
Always
10 kohms or higher
K16-4 (RR-) - Body ground
Tester Connection Condition Specified Condition
1 - 2
Always
1.5 to 2.1 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
NG: REPLACE REAR NO. 1 SPEAKER (see REMOVAL )
Fig. 209: Identifying Rear No. 1 Speaker Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to next step.
15. CHECK HARNESS AND CONNECTOR (REAR NO. 1 SPEAKER - REAR NO. 2 SPEAKER)
a. Disconnect the O1, O2, O7 and O8 speaker connectors.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
TESTER CONNECTION SPECIFIED CONDITION
for RH
TESTER CONNECTION SPECIFIED CONDITION
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
Tester Connection
Condition Specified Condition
O8-4 (+) - O7-1
Always
Below 1 ohms
O8-2 (-) - O7-2
O8-4 (+) - Body ground
Always
10 kohms or higher
O8-2 (-) - Body ground
Tester Connection
Condition Specified Condition
O2-4 (+) - O1-1
Always
Below 1 ohms
O2-2 (-) - O1-2
O2-4 (+) - Body ground
Always
10 kohms or higher
O2-2 (-) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 210: Checking Harness And Connector (Rear No. 1 Speaker - Rear No. 2 Speaker)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: REPLACE REAR NO. 2 SPEAKER (see REMOVAL )
16. INSPECT BOX SPEAKER
a. Disconnect the P14 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE BOX SPEAKER (see REMOVAL )
Tester Connection Condition Specified Condition
1 - 2
Always
1.5 to 2.1 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 211: Identifying P14 Speaker Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to next step.
17. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - BOX
SPEAKER)
a. Disconnect the K17 amplifier connector.
b. Disconnect the P14 speaker connector.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
Fig. 212: Identifying K17 And P14 Connectors Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Tester Connection
Condition Specified Condition
K17-5 (WF1+) - P14-1
Always
Below 1 ohms
K17-12 (WF1-) - P14-2
K17-5 (WF1+) - Body ground
Always
10 kohms or higher
K17-12 (WF1-) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст