Toyota Tundra. Manual — part 164
Fig. 76: Identifying Front No. 2 Speaker Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
6. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - FRONT NO. 2
SPEAKER)
a. Disconnect the K16 amplifier connector.
b. Disconnect the K10 and K12 speaker connectors.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
TESTER CONNECTION SPECIFIED CONDITION
for RH
TESTER CONNECTION SPECIFIED CONDITION
Tester Connection
Condition Specified Condition
K16-8(FL+) - K12-3 (TWL+)
Always
Below 1 ohms
K16-7(FL-) - K12-4 (TWL-)
K16-8(FL+) - Body ground
Always
10 kohms or higher
K16-7(FL-) - Body ground
Tester Connection
Condition Specified Condition
K16-2(FR+) - K10-3 (TWR+)
Always
Below 1 ohms
K16-6(FR-) - K10-4 (TWR-)
K16-2(FR+) - Body ground
Always
10 kohms or higher
K16-6(FR-) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 77: Checking Harness And Connector (Stereo Component Amplifier - Front No. 2
Speaker)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE STEREO COMPONENT AMPLIFIER (see REMOVAL )
7. INSPECT FRONT NO. 3 SPEAKER
a. Disconnect the M1 and N1 speaker connectors.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE FRONT NO. 3 SPEAKER (see REMOVAL )
Tester Connection Condition Specified Condition
1 - 2
Always
2.5 to 3.5 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 78: Identifying Front No.3 Speaker LH Harness
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
8. CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER - FRONT NO. 3 SPEAKER)
a. Disconnect the M1, N1, K10 and K12 speaker connectors.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
TESTER CONNECTION SPECIFIED CONDITION
for RH
TESTER CONNECTION SPECIFIED CONDITION
Tester Connection
Condition Specified Condition
K12-1(+) - N1-3
Always
Below 1 ohms
K12-2(-) - N1-1
K12-1 (+) - Body ground
Always
10 kohms or higher
K12-2 (-) - Body ground
Tester Connection
Condition Specified Condition
K10-1(+) - M1-3
Always
Below 1 ohms
K10-2(-) - M1-1
K10-1 (+) - Body ground
Always
10 kohms or higher
K10-2 (-) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 79: Checking Harness And Connector (Front No. 2 Speaker - Front No. 3 Speaker)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE FRONT NO. 2 SPEAKER (see REMOVAL )
9. INSPECT FRONT NO. 4 SPEAKER
a. Disconnect the K14 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE FRONT NO. 4 SPEAKER (see REMOVAL )
Tester Connection Condition Specified Condition
1 - 2
Always
1.5 to 2.1 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст