Toyota Tundra. Manual — part 165
Fig. 80: Identifying Front No. 4 Speaker Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
10. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - FRONT NO. 4
SPEAKER)
a. Disconnect the K14 speaker connector.
b. Disconnect the K17 amplifier connector.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
Tester Connection
Condition Specified Condition
K17-4(CTR+) - K14-1
Always
Below 1 ohms
K17-10(CTR-) - K14-2
K17-4(CTR+) - Body ground
Always
10 kohms or higher
K17-10 (CTR-) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 81: Identifying K17 And K14 Connectors Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: REPLACE STEREO COMPONENT AMPLIFIER (see REMOVAL )
11. CHECK SPEAKER
a. Check the malfunctioning speakers.
Result:
RESULT REFERENCE
B: Go to step 14
A: Go to Next Step
12. INSPECT REAR NO. 1 SPEAKER
a. Disconnect the O1 and O7 speaker connectors.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
Result
Proceed to
Rear No. 1 speaker
A
Box speaker
B
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE REAR NO. 1 SPEAKER (see REMOVAL )
Fig. 82: Identifying Rear No. 1 Speaker Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
13. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - REAR NO. 1
SPEAKER)
a. Disconnect the K16 amplifier connector.
b. Disconnect the O1 and O7 speaker connectors.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
TESTER CONNECTION SPECIFIED CONDITION
for RH
TESTER CONNECTION SPECIFIED CONDITION
Tester Connection Condition Specified Condition
1 - 2
Always
1.5 to 2.1 ohms
Tester Connection
Condition Specified Condition
K16-3 (RL+) - O7-1
Always
Below 1 ohms
K16-9 (RL-) - O7-2
K16-3 (RL+) - Body ground
Always
10 kohms or higher
K16-9(RL-) - Body ground
Tester Connection
Condition Specified Condition
K16-10(RR+) - O1-1
Always
Below 1 ohms
K16-4(RR-) - O1-2
K16-10(RR+) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 83: Identifying K16 Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE STEREO COMPONENT AMPLIFIER (see REMOVAL )
14. INSPECT BOX SPEAKER
a. Disconnect the P14 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE BOX SPEAKER (see REMOVAL )
K16-4(RR-) - Body ground
Always
10 kohms or higher
Tester Connection Condition Specified Condition
1 - 2
Always
1.5 to 2.1 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст