Toyota Tundra. Manual — part 498
Fig. 111: Identifying Front No. 4 Speaker Connector Terminal
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPLACE FRONT NO. 4 SPEAKER (See REMOVAL )
OK: REPLACE BOX SPEAKER (See REMOVAL )
7. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - SPEAKERS)
a. Disconnect the K16 amplifier connector.
b. Disconnect the K10, K12, N1, M1, O1 and O7 speaker connectors.
Tester Connection Condition Specified Condition
1-2
Always
1.5 to 2.1 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Navigation - Tundra
Fig. 112: Identifying K10, K12, N1, M1, O1 And O7 Speaker Connectors
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Navigation - Tundra
HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - SPEAKERS)
TESTER CONNECTION SPECIFIED CONDITION
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: Go to Next Step
8. INSPECT FRONT NO. 3 SPEAKER LH
a. Disconnect the N1 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
FRONT NO. 3 SPEAKER LH TESTER CONNECTION SPECIFIED CONDITION
Tester Connection
Condition Specified Condition
K16-6(FR-)-K10-4 (TWR-)
Always
Below 1 ohms
K16-2(FR+)-K10-3 (TWR+)
K16-7(FL-)-K12-4 (TWL-)
K16-8(FL+)-K12-3 (TWL+)
K10-2(-)-M1-1
K10-1(+)-M1-3
K12-2(-)-N1-1
K12-1(+)-N1-3
K16-4(RR-)-O1-2
K16-10(RR+)-O1-1
K16-9(RL-)-O7-2
K16-3(RL+)-O7-1
K16-8(FL+)-Body ground
Always
10 kohms or higher
K16-7(FL-)-Body ground
K16-2(FR+)-Body ground
K16-6(FR-)-Body ground
K16-3(RL+) - Body ground
K16-9(RL-)-Body ground
K16-10(RR+)-Body ground
K16-4(RR-)-Body ground
K10-2(-)-Body ground
K10-1(+)-Body ground
K12-2(-)-Body ground
K12-1(+)-Body ground
Tester Connection Condition Specified Condition
1-3
Always
2.5 to 3.5 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Navigation - Tundra
Fig. 113: Identifying N1 Speaker Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPLACE FRONT NO. 3 SPEAKER LH (See REMOVAL )
OK: Go to Next Step
9. INSPECT FRONT NO. 3 SPEAKER RH
a. Disconnect the M1 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
FRONT NO. 3 SPEAKER RH TESTER CONNECTION SPECIFIED CONDITION
Fig. 114: Identifying M1 Speaker Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPLACE FRONT NO. 3 SPEAKER RH (See REMOVAL )
OK: Go to Next Step
10. INSPECT FRONT NO. 2 SPEAKER LH
a. Disconnect the K12 speaker connector.
Tester Connection Condition Specified Condition
1-3
Always
2.5 to 3.5 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Navigation - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст