Toyota Tundra. Manual — part 2303
a
Connect the 2 hoses
b
Install the air tube with the bolt
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Fig. 112: Locating Air Tube Sub-Assembly Bolts And Hoses
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
12
INSTALL NO. 1 ENGINE COVER (See INSTALLATION )
13
INSTALL NO. 2 ENGINE COVER (See INSTALLATION )
14
INSTALL FRONT WATER BY-PASS JOINT
a
Install 2 new gaskets and the water by-pass joint with the 4 nuts
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
Fig. 113: Locating No. 2 Water By-Pass Hose With Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Connect the No 2 water by-pass hose to the water by-pass joint
15
INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY
a
Connect the 2 hoses
b
Install the water by-pass pipe with the 2 bolts
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FBE) - Tundra
Fig. 114: Locating Hoses, Water By-Pass Pipe And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c
Connect the air tube with the bolt
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Fig. 115: Locating Air Tube With Mounting Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
16
INSTALL NO. 1 WATER BY-PASS HOSE
a
Install the No 1 water by-pass hose by connecting the hose to the water inlet housing and front
water by-pass joint
Fig. 116: Locating No. 1 Water By-Pass Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
17
INSTALL GENERATOR ASSEMBLY
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FBE) - Tundra
a
Install the 2 stud bolts
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
b
Install the generator with the 2 bolts and 2 nuts
Torque: 43 N*m (439 kgf*cm, 32 ft.*lbf)
Fig. 117: Locating Generator Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c
Connect the generator connector
Fig. 118: Locating Generator Connector And Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d
Connect the generator wire with the nut
Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
e
Install the terminal cap
f
Connect the wire harness bracket to the generator with the bolt
Torque: 31 N*m (316 kgf*cm, 23 ft.*lbf)
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FBE) - Tundra
Fig. 119: Locating Wire Harness Bracket Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
18
CONNECT VANE PUMP ASSEMBLY
HINT:
Before performing the following procedures, move the spacer until the vane pump can be installed
Fig. 120: Moving Spacer
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
a
Connect the vane pump to the timing chain cover with the 2 bolts
Torque: 28 N*m (286 kgf*cm, 21 ft.*lbf)
Fig. 121: Locating Vane Pump Assembly Bolts
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст