Toyota Sequoia (2005). Manual — part 705
B17493
Engine Wire
VSV Connector
for Air Injection
System
Engine Wire
Throttle Body
Connector
Fuel Return Hose
Engine Wire
Injector Connector
VSV Connector for
EVAP
VVT Sensor 2
N·m (kgf·cm, ft·lbf)
: Specified torque
Non–reusable part
Gasket
VVT Sensor 1
VSV Connector
for ACIS
VVT Sensor Connector
VVT Sensor Connector
18 (185, 13)
18 (185, 13)
7.5 (76, 66 in.·lbf)
–
SFI
VVT SENSOR
SF–75
2809
SF0PW–03
B17494
Ohmmeter
SF–76
–
SFI
VVT SENSOR
2810
INSPECTION
NOTICE:
”Cold” and ”Hot in these sentences express the tempera-
ture of the sensors themselves. ”Cold” is from – 10
°
C
(14
°
F) to 50
°
C (122
°
F) and ”Hot” is from 50
°
C (122
°
F) to
100
°
C (212
°
F).
1.
REMOVE THROTTLE BODY COVER
2.
REMOVE INTAKE MANIFOLD ASSEMBLY
(See page
3.
INSPECT VVT SENSOR RESISTANCE
(a)
Disconnect the VVT sensor connector.
(b)
Using an ohmmeter, measure the resistance between the
terminals.
Resistance:
Cold
835 to 1,400
Ω
Hot
1,060 to 1,645
Ω
If the resistance is not as specified, replace the sensor.
(c)
Reconnect the VVT sensor connector.
(d)
Connect the VVT sensor connector.
4.
REINSTALL INTAKE MANIFOLD ASSEMBLY
(See page
5.
REINSTALL THROTTLE BODY COVER
SF1XY–01
–
SFI
VVT SENSOR
SF–77
2811
REPLACEMENT
1.
REMOVE THROTTLE BODY COVER
2.
REMOVE INTAKE MANIFOLD ASSEMBLY
(See page
3.
REMOVE VVT SENSOR
(a)
Disconnect the VVT sensor connector.
(b)
Remove the bolt and VVT sensor.
4.
INSTALL VVT SENSOR
(a)
Attach a new VVT sensor to the cylinder head.
(b)
Install the VVT sensor with the bolt.
Torque: 6.5 N·m (65 kgf·cm, 58 in.·lbf)
5.
REINSTALL INTAKE MANIFOLD ASSEMBLY
(See page
6.
REINSTALL THROTTLE BODY COVER
SF1UM–05
B16380
Accelerator Pedal
Assembly
N·m (kgf·cm, ft·lbf) : Specified torque
Accelerator Pedal
Position Sensor
Accelerator Pedal Position
Sensor Connector
5.0 (51, 44 in.·lbf)
SF–78
–
SFI
ACCELERATOR PEDAL POSITION SENSOR
2812
ACCELERATOR PEDAL POSITION SENSOR
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст