Toyota Tundra (2015 year). Manual — part 1804
3UR-FBE STARTING: STARTER: COMPONENTS; 2015 MY Tundra ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002MDN041X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE STARTING: STARTER: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from
the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery
terminal notice before proceeding with work
.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE NO. 1 ENGINE UNDER COVER
4. REMOVE V-BANK COVER SUB-ASSEMBLY
5. REMOVE AIR CLEANER HOSE ASSEMBLY
6. REMOVE AIR CLEANER ASSEMBLY
7. REMOVE FAN AND GENERATOR V BELT
8. REMOVE FRONT FENDER APRON SEAL RH
9. DISCONNECT VANE PUMP ASSEMBLY
(a) Detach the 2 clamps and disconnect the power steering oil
pressure switch connector.
(b) Remove the 2 bolts and disconnect the vane pump.
10. REMOVE GENERATOR ASSEMBLY
3UR-FBE STARTING: STARTER: REMOVAL; 2015 MY Tundra [08/...
(a) Disconnect the generator connector.
(b) Remove the terminal cap and nut, and disconnect the generator wire.
(c) Remove the bolt and disconnect the wire harness bracket
from the generator.
(d) Remove the 3 bolts, nut and generator.
11. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
(a) Remove the dipstick.
(b) Remove the bolt and dipstick guide.
(c) Remove the O-ring from the dipstick guide.
12. REMOVE FRONT EXHAUST PIPE ASSEMBLY
(a) Disconnect the air fuel ratio sensor connector.
(b) Disconnect the heated oxygen sensor connector and detach the 2 clamps.
(c) Remove the 2 bolts.
(d) Remove the 3 nuts and front exhaust pipe.
(e) Remove the 2 gaskets.
3UR-FBE STARTING: STARTER: REMOVAL; 2015 MY Tundra [08/...
13. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
14. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH
15. REMOVE STARTER COVER
(a) Remove the 3 bolts and starter cover.
16. REMOVE STARTER ASSEMBLY
(a) Detach the 2 wire harness clamps.
(b) Disconnect the starter connector.
(c) Remove the nut and disconnect the starter wire.
(d) Remove the 2 bolts and starter.
(e) Remove the flywheel housing side cover.
3UR-FBE STARTING: STARTER: REMOVAL; 2015 MY Tundra [08/...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст