Toyota Tundra (2015 year). Manual — part 741
peeled off or discolored, or 3) grooves or printed numbers have
Before assembling new discs, soak them in ATF for at least 2
hours.
25. INSPECT REAR PLANETARY GEAR ASSEMBLY
(a) Using a feeler gauge, measure the rear planetary gear pinion
thrust clearance.
Standard clearance:
0.2 to 0.6 mm (0.00787 to 0.0236 in.)
If the clearance is greater than the standard, replace the
planetary gear assembly.
Standard inside diameter:
20.0 to 20.025 mm (0.787 to 0.788 in.)
If the inside diameter is greater than the standard, replace
the rear planetary gear assembly.
26. INSPECT 1ST AND REVERSE BRAKE RETURN SPRING
SUB-ASSEMBLY
Standard free length:
23.54 to 23.94 mm (0.927 to 0.943 in.)
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
27. INSPECT INDIVIDUAL PISTON OPERATION
(a) Check the operating sound while applying compressed air into
the oil holes indicated in the illustration.
HINT:
When inspecting the direct clutch, check with the C3 accumulator
piston holes indicated in the illustration.
If there is no sound, disassemble and check the installation
1.
No. 3 clutch (C3)
2.
No. 4 clutch (C4)
3.
No. 1 clutch (C1)
4.
No. 3 brake (B3)
5.
No. 1 brake (B1)
6.
No. 2 brake (B2)
7.
No. 4 brake (B4)
8.
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000013F006UX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISSION UNIT: REASSEMBLY; 2015 MY Tundra
[08/2014 - ]
REASSEMBLY
1. BEARING POSITION
Bearing and race diameter:
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
MARK FRONT RACE DIAMETER INSIDE /
OUTSIDE
THRUST BEARING DIAMETER
INSIDE / OUTSIDE
REAR RACE DIAMETER INSIDE /
OUTSIDE
A
74.3 to 74.6 mm (2.93 to 2.94
in.) / 87.4 to 87.7 mm (3.44 to
3.45 in.)
72.0 to 72.3 mm (2.83 to 2.85
in.) / 85.3 to 85.6 mm (3.36 to
3.37 in.)
-
B
38.0 to 38.3 mm (1.50 to 1.51
in.) / 53.9 to 54.1 mm (2.12 to
2.13 in.)
36.5 to 36.7 mm (1.437 to 1.445
in.) / 52.9 to 53.2 mm (2.08 to
2.09 in.)
-
C
-
21.1 to 21.3 mm (0.83 to 0.84
in.) / 39.5 to 39.8 mm (1.56 to
1.57 in.)
22.8 to 23.1 mm (0.898 to 0.909
in.) / 44.5 to 44.8 mm (1.75 to
1.76 in.)
D
-
39.5 to 39.7 mm (1.555 to 1.563
in.) / 60.5 to 60.8 mm (2.38 to
2.39 in.)
-
E
-
46.5 to 46.7 mm (1.83 to 1.84
in.) / 64.4 to 64.6 mm (2.535 to
2.543 in.)
-
F
55.0 to 55.2 mm (2.165 to 2.173
in.) / 68.8 to 69.3 mm (2.71 to
2.73 in.)
54.6 to 54.8 mm (2.15 to 2.16
in.) / 70.0 to 70.5 mm (2.76 to
2.78 in.)
-
G
-
65.4 to 65.6 mm (2.57 to 2.58
in.) / 85.6 to 86.0 mm (3.37 to
3.39 in.)
62.9 to 63.1 mm (2.476 to 2.484
in.) / 82.3 to 82.6 mm (3.24 to
3.25 in.)
H
39.5 to 39.8 mm (1.56 to 1.57
in.) / 56.9 to 57.2 mm (2.24 to
2.25 in.)
36.5 to 36.6 mm (1.437 to 1.441
in.) / 56.8 to 57.1 mm (2.24 to
2.25 in.)
36.5 to 36.7 mm (1.437 to 1.445
in.) / 56.7 to 57.2 mm (2.23 to
2.25 in.)
I
21.1 to 21.3 mm (0.831 to 0.839
in.) / 39.9 to 40.1 mm (1.57 to
1.58 in.)
23.0 to 23.3 mm (0.906 to 0.917
in.) / 44.0 to 44.2 mm (1.73 to
1.74 in.)
-
J
-
43.6 to 43.9 mm (1.72 to 1.73
in.) / 63.0 to 63.2 mm (2.48 to
2.49 in.)
47.2 to 47.4 mm (1.86 to 1.87
in.) / 67.1 to 67.4 mm (2.64 to
2.65 in.)
2. INSTALL 1ST AND REVERSE BRAKE PISTON
(a) Coat 3 new O-rings with ATF, and install them to the 1st and reverse brake piston.
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст