Toyota Tundra (2015 year). Manual — part 864
HINT:
Text in Illustration
*a
Intermediate Shaft
*b Dimension A
*c
Tires supported and vehicle empty (When using drive-on
type lift)
*d
Full rebound position (When using 2
post lift)
Front Side
-
-
Standard Dimension A:
VEHICLE MODEL
VEHICLE CONDITION
DIMENSION A
All Model
Tires supported and vehicle empty (When using drive-on type lift)
26.0 mm (1.024 in.)
Full rebound position (When using 2 post lift)
26.0 mm (1.024 in.)
Torque:
40 N·m {410 kgf·cm, 30ft·lbf}
Text in Illustration
*a
90°
*b
Bracket Center Line
*c
Shaft Axial Direction
4. INSPECT PROPELLER SHAFT JOINT ANGLE
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
NOTICE:
Perform the inspection on a level surface.
Perform the inspection with the vehicle empty.
Perform the inspection with all wheels on the ground.
(a) Measure the No. 1 joint angle.
Text in Illustration
*a
Intermediate Shaft Angle: C
-
-
intermediate shaft (C) to calculate the No. 1 joint angle.
Text in Illustration
*a
No. 1 Joint Angle
No. 1 joint angle:
INTERMEDIATE SHAFT
ANGLE MEASURED
VALUE (C)
TRANSFER FLANGE
ANGLE MEASURED
VALUE (A)
NO. 1 JOINT ANGLE
(CALCULATED
VALUE)
(C) - (A)
2°30' (2.50°)
3°45' (3.75°)
-1°15' (-1.25°)
HINT:
Using the following chart, check if the calculated No. 1 joint
angle is within the specified value.
The tolerance is +/-0°60' (1.00°).
Standard No. 1 Joint Angle:
VEHICLE MODEL
NO. 1 JOINT ANGLE
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
VEHICLE MODEL
NO. 1 JOINT ANGLE
UPK56L-CRTSKA
0°52' +/-0°60' (0.87° +/-1.00°)
UPK56L-CRTSKA*1
UPK56L-PSTSKA
0°52' +/-0°60' (0.87° +/-1.00°)
UPK56L-PSTSKA*1
USK56L-CRTLGA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-CRTLGA*1
USK56L-CRTLKA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-CRTLKA*1
USK56L-CRTSGA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-CRTSGA*1
USK56L-CRTSGA*2
USK56L-CRTSKA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-CRTSKA*1
USK56L-CRTSKA*2
USK56L-PSTLGA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-PSTLGA*1
USK56L-PSTLKA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-PSTLKA*1
USK56L-PSTSGA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-PSTSGA*1
USK56L-PSTSGA*2
USK56L-PSTSKA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-PSTSKA*1
USK56L-PSTSKA*2
USK56L-PSTZGA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-PSTZKA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-THTSGA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-THTSGA*1
USK56L-THTSKA
0°52' +/-0°60' (0.87° +/-1.00°)
USK56L-THTSKA*1
USK57L-CHTSGA
1°07' +/-0°60' (1.12° +/-1.00°)
USK57L-CHTSGA*1
USK57L-CHTSKA
1°07' +/-0°60' (1.12° +/-1.00°)
USK57L-CHTSKA*1
HINT:
*1: includes Off road package
*2: includes Off road pro package
If the measured angle is not within the specification, adjust it
with the bearing washer (See "Adjust Propeller Shaft Angle").
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
(b) Measure the No. 2 joint angle.
Text in Illustration
*a
Propeller Shaft Angle: D
-
-
Text in Illustration
*a
No. 2 Joint Angle
-
-
No. 2 joint angle:
INTERMEDIATE SHAFT ANGLE
MEASURED VALUE (C)
PROPELLER SHAFT ANGLE
MEASURED VALUE (D)
NO. 2 JOINT ANGLE
(CALCULATED VALUE)
(C) - (D)
2°30' (2.50°)
5°45' (5.75°)
-3°15' (-3.25°)
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст