Toyota Tundra (2015 year). Manual — part 862
(k) Using needle-nose pliers, install the previously selected snap
ring into the groove on the shaft yoke.
HINT:
Use the same installation procedure for the universal joint spider
bearing on the opposite side.
2. INSTALL NO. 1 CENTER SUPPORT BEARING ASSEMBLY
Text in Illustration
Front
(c) Align the matchmarks on the joint yoke and intermediate shaft.
Text in Illustration
*a
Matchmark
(d) Install the washer.
(e) Clamp the yoke in a vise, and press the bearing into position by installing a new lock nut.
Torque:
128 N·m {1300 kgf·cm, 94ft·lbf}
(f) Loosen the lock nut.
(g) Tighten the lock nut again.
Torque:
128 N·m {1300 kgf·cm, 94ft·lbf}
(h) Using a chisel and hammer, stake the lock nut.
3. INSTALL REAR PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
(a) Apply MP grease to a new spider and 4 new bearings.
NOTICE:
Be careful not to apply too much grease.
(b) Measure dimension A between the snap ring grooves.
NOTICE:
When measuring dimension B, fix the spider and spider bearings in a vise and hold them firmly together.
(d) w/o Grease Fitting Spider Bearing:
(1) Select snap rings to make dimensions A and B the same.
Snap ring type for steel yoke:
COLOR
THICKNESS
Purple
1.46 mm (0.0574 in.)
Black
1.49 mm (0.0586 in.)
Copper
1.51 mm (0.0594 in.)
White
1.56 mm (0.0614 in.)
Yellow
1.59 mm (0.0625 in.)
Blue
1.64 mm (0.0646 in.)
Snap ring type for aluminum yoke:
COLOR
THICKNESS
Black
1.52 mm (0.0598 in.)
Black
1.54 mm (0.0606 in.)
Black
1.57 mm (0.0618 in.)
Black
1.62 mm (0.0638 in.)
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
NOTICE:
(1) Select snap rings to make dimensions A and B the same.
Snap ring type:
COLOR
THICKNESS
Black
1.49 mm (0.0586 in.)
Copper
1.51 mm (0.0594 in.)
White
1.56 mm (0.0614 in.)
Yellow
1.59 mm (0.0625 in.)
NOTICE:
yoke.
(g) Using SST, press the universal joint spider bearing into the
propeller shaft yoke until the groove can be seen.
SST: 09336-16010
SST: 09950-40011
09951-04020
09952-04010
09953-04020
09954-04020
09955-04051
09957-04010
SST: 09950-60010
09951-00290
Text in Illustration
*a
Spider Bearing
*b
Turn
*c
Hold
NOTICE:
Confirm that the universal joint spider moves smoothly while
pressing in the bearing.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
(h) Using needle-nose pliers, install the previously selected snap
Use the same installation procedure for the universal joint spider
bearing on the opposite side.
(i) Align the matchmarks on the propeller shaft yoke and universal joint yoke, and temporarily install the
spider and 2 universal joint spider bearings into the universal joint yoke.
(j) Using SST, press the universal joint spider bearing into the
universal joint yoke until the groove can be seen.
SST: 09336-16010
SST: 09950-40011
09951-04020
09952-04010
09953-04020
09954-04020
09955-04051
09957-04010
SST: 09950-60010
09951-00290
Text in Illustration
*a
Spider Bearing
*b
Turn
*c
Hold
(k) Using needle-nose pliers, install the previously selected snap ring into the groove on the universal joint
yoke.
HINT:
Use the same installation procedure for the universal joint spider bearing on the opposite side.
4. INSTALL PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING
(a) Check the spider bearings for wear and damage.
(b) Measure each spider bearing's axial play by turning the yoke while holding the shaft tightly.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст