Toyota Tundra (2015 year). Manual — part 2877
(b) Loosely install the temporary bolt onto the window regulator.
(c) Insert the window regulator into the door panel. Use the temporary bolt to hang the window regulator on
the door panel.
(d) Temporarily install the window regulator with the 5 bolts, and tighten the temporary bolt so that it
contacts the door panel.
(e) Tighten the 6 bolts in the order shown in the illustration.
Torque:
8.0 N·m {82 kgf·cm, 71in·lbf}
(f) Connect the connector.
22. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH
(a) Insert the door glass into the door panel along the glass run as
indicated by the arrows in the illustration.
NOTICE:
Be careful not to damage the glass.
(b) Install the door glass to the window regulator with the 2 bolts.
Torque:
8.0 N·m {82 kgf·cm, 71in·lbf}
(c) Install the hole plug.
23. INSTALL FRONT DOOR SERVICE HOLE COVER LH
(a) Install the front door service hole cover to the door panel.
NOTICE:
When installing the service hole cover, pull out the links through the service hole cover.
There should be no wrinkles or folds after attaching the service hole cover.
After attaching the service hole cover, check the sealing quality.
(b) Connect the clamp.
24. INSTALL FRONT NO. 1 DOOR TRIM BRACKET
ENGINE HOOD / DOOR: FRONT DOOR (for Regular Cab): REASS...
(a) Install the bracket with the 2 screws.
25. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
26. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
27. INSTALL FRONT INNER DOOR GLASS WEATHERSTRIP LH
28. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
(a) Connect the 2 cables to the inside handle.
(b) Attach the inside handle's knob to the door trim board.
(c) Attach the 10 clips to install the door trim board.
(d) Install the inside handle and door trim board to the door trim
panel with the screw.
(e) Install the door trim board to the door panel with the screw.
(f) Attach the clip.
ENGINE HOOD / DOOR: FRONT DOOR (for Regular Cab): REASS...
29. INSTALL FRONT DOOR ARMREST COVER LH
30. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH
(a) Attach the 3 clips to install the front lower door frame bracket
garnish.
31. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)
(a) Install the plate and regulator handle with the snap ring.
HINT:
With the door window fully closed, install the plate and the
regulator handle with the snap ring as shown in the illustration.
32. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Power Window)
33. INSTALL FRONT UPPER ARMREST BASE PANEL LH (w/ Power Window)
(a) Connect the master switch connector.
(b) Attach the 2 clips and 5 claws to install the front upper armrest
base panel LH.
34. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH
ENGINE HOOD / DOOR: FRONT DOOR (for Regular Cab): REASS...
(a) Attach the 4 claws to install the bezel plug.
35. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
36. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light
.
ENGINE HOOD / DOOR: FRONT DOOR (for Regular Cab): REASS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст