Toyota Tundra (2015 year). Manual — part 494
NOTICE:
34. INSTALL DIRECT CLUTCH DISC
(a) Install the 6 plates, 6 discs and direct clutch flange to the clutch drum.
Install in order:
P - D - P - D - P - D - P - D - P - D - P - D - F
HINT:
P = Plate
D = Disc
F = Flange
NOTICE:
Before assembling new discs, soak them in ATF for at least 2 hours.
(b) Using a screwdriver, install the snap ring to the clutch drum.
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
2
, 57 psi) into the oil hole as shown in the
illustration.
Standard moving distance (A):
0.60 to 0.90 mm (0.0236 to 0.0354 in.)
Flange Thickness:
MARK
THICKNESS
2
2.95 to 3.05 mm (0.116 to 0.120 in.)
3
3.05 to 3.15 mm (0.120 to 0.124 in.)
4
3.15 to 3.25 mm (0.124 to 0.128 in.)
5
3.25 to 3.35 mm (0.128 to 0.132 in.)
6
3.35 to 3.45 mm (0.132 to 0.136 in.)
7
3.45 to 3.55 mm (0.136 to 0.140 in.)
8
3.55 to 3.65 mm (0.140 to 0.144 in.)
9
3.65 to 3.75 mm (0.144 to 0.148 in.)
A
3.75 to 3.85 mm (0.148 to 0.152 in.)
(d) Temporarily remove the snap ring, replace the flange with the selected flange and reinstall the snap ring.
35. SELECT REVERSE CLUTCH FLANGE
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
(a) Using a screwdriver, install the snap ring to the clutch drum.
NOTICE:
Make sure to install the direct clutch and reverse clutch snap rings so that their openings face opposite
directions.
(b) Install the 2 flanges, 5 discs, 4 plates, cushion plate and reverse
clutch reaction sleeve to the clutch drum.
Install in order:
F - D - P - D - P - D - P - D - P - D - F - C
HINT:
F = Flange
D = Disc
P = Plate
C = Cushion plate
(c) Using a screwdriver, install the hole snap ring.
4.0 kgf/ cm
2
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
Standard moving distance (A minus B):
0.50 to 0.80 mm (0.0197 to 0.0315 in.)
Flange Thickness:
MARK
THICKNESS
0
2.75 to 2.85 mm (0.108 to 0.112 in.)
1
2.85 to 2.95 mm (0.112 to 0.116 in.)
2
2.95 to 3.05 mm (0.116 to 0.120 in.)
3
3.05 to 3.15 mm (0.120 to 0.124 in.)
4
3.15 to 3.25 mm (0.124 to 0.128 in.)
5
3.25 to 3.35 mm (0.128 to 0.132 in.)
6
3.35 to 3.45 mm (0.132 to 0.136 in.)
7
3.45 to 3.55 mm (0.136 to 0.140 in.)
8
3.55 to 3.65 mm (0.140 to 0.144 in.)
9
3.65 to 3.75 mm (0.144 to 0.148 in.)
A
3.75 to 3.85 mm (0.148 to 0.152 in.)
(e) Remove the snap ring, reverse clutch reaction sleeve and rear
clutch disc set from the clutch drum.
36. INSTALL FORWARD CLUTCH PISTON SUB-ASSEMBLY AND COAST CLUTCH PISTON
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст