Toyota Tundra (2015 year). Manual — part 620
(a) Place SST on the direct clutch piston, and compress the return spring with a press.
SST: 09380-60010
09381-06030
09381-06040
09381-06080
(b) Using SST, remove the snap ring.
SST: 09350-30020
09350-07070
(c) Place the oil pump onto the torque converter clutch, and then place the clutch drum onto the oil pump.
(d) Hold the direct clutch piston by hand and apply compressed air
and direct clutch return spring sub-assembly.
(e) Remove the No. 2 clutch balancer and direct clutch return spring
sub-assembly from the direct clutch piston.
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(f) Remove the 2 O-rings from the direct clutch piston.
57. INSPECT DIRECT CLUTCH RETURN SPRING SUB-ASSEMBLY
58. REMOVE NO. 3 BRAKE SNAP RING
(a) Using a screwdriver, remove the No. 3 brake snap ring from the
transmission case.
59. REMOVE NO. 3 BRAKE DISC SET
(a) Remove the 2 flanges, 4 discs and 3 plates from the
transmission case.
60. INSPECT NO. 3 BRAKE DISC
61. REMOVE NO. 3 BRAKE PISTON HOLE SNAP RING
(a) Using SST, remove the snap ring.
SST: 09350-30020
09350-07060
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
62. REMOVE NO. 3 BRAKE CYLINDER WITH NO. 3 BRAKE
PISTON AND NO. 3 BRAKE PISTON RETURN SPRING
SUB-ASSEMBLY
(a) Remove the No. 3 brake cylinder with the No. 3 brake piston
and No. 3 brake piston return spring from the transmission case.
63. REMOVE NO. 3 BRAKE PISTON
(a) Using SST and a press, compress the return spring and remove the snap ring and No. 3 brake piston
return spring with a screwdriver.
SST: 09380-60010
09381-06020
09381-06040
09381-06060
09381-06100
09381-06110
(b) Hold the No. 3 brake piston and apply compressed air (392 kPa,
4.0 kgf/cm 2 , 57 psi) to the No. 3 brake cylinder to remove the
No. 3 brake piston.
(c) Remove the 2 O-rings from the No. 3 brake piston.
64. INSPECT NO. 3 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
65. REMOVE 1-WAY CLUTCH ASSEMBLY WITH 1-WAY
CLUTCH INNER RACE SUB-ASSEMBLY
(a) Remove the 1-way clutch with 1-way clutch inner race from the
transmission case.
66. INSPECT 1-WAY CLUTCH ASSEMBLY
67. REMOVE 1-WAY CLUTCH INNER RACE SUB-ASSEMBLY
(a) Separate the 1-way clutch inner race from the 1-way clutch and
remove the No. 1 planetary carrier thrust washer.
68. REMOVE FRONT PLANETARY GEAR ASSEMBLY
(a) Remove the front planetary gear and thrust needle roller bearing from the transmission case.
(b) Remove the No. 2 planetary carrier thrust washer, thrust
bearing race and front planetary sun gear from the front
planetary gear.
69. INSPECT FRONT PLANETARY GEAR ASSEMBLY
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст