Toyota Tundra (2015 year). Manual — part 136
TESTER DISPLAY MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
Max.: 255
When system is normal: 0
When a malfunction is detected:
More than 0
-
Blind Spot Monitor Slave
TESTER DISPLAY
MEASUREMENT
ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
Warning
Indicator Turning
on (Slave)
on / OFF or ON
OFF: The following conditions are
not met
Not during initial
check
Vehicle detected
in warning area
Vehicle speed 16
km/h (10 mph)
or more
Shift lever in any
position except R
No DTC output
-
Warning
Indicator Flashing
(Slave)
/ OFF or ON
OFF: The following conditions are
not met
Not during initial
check
Vehicle detected
in warning area
Vehicle speed 16
km/h (10 mph)
or more
Shift lever in any
position except R
No DTC output
-
Buzzer Sound
Status
spot monitor buzzer) / OFF
or ON
OFF: Buzzer not sounding
Not during initial
check
Vehicle detected
in warning area
PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM...
TESTER DISPLAY
MEASUREMENT
ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
traffic alert
Speed difference
between driver's
vehicle and
target vehicle is
1.5 m/s or more
Shift lever in R
No DTC output
Warning
Indicator Input
Circuit Voltage
Outer rear view mirror
indicator voltage / Min.: 0
V, Max.: 25.5 V
Not illuminated: 0 V
Illuminated: 2.5 to 7.5 V
-
Warning
Indicator Input
Circuit Current
Outer rear view mirror
indicator current / Min.: 0
mA, Max.: 255 mA
Not illuminated: 0 mA
Illuminated: 5 to 100 mA
-
Buzzer Input
Circuit Voltage
Rear cross traffic alert
buzzer (blind spot monitor
buzzer) voltage / Min.: 0 V,
Max.: 25.5 V
Not sounding buzzer: 11 to 14 V
Sounding buzzer: Alternating
between 0 to 14 V
-
Right Turn SW
State (CAN)
(right turn signal light
switch) / ON or OFF
-
Left Turn SW
State (CAN)
(left turn signal light
switch) / ON or OFF
-
Reverse
ON: Shift lever in R
OFF: Shift lever in any position
except R
-
Vehicle Speed
Vehicle speed signal / Min.:
0 km/h (0 mph), Max.: 326
km/h (203 mph)
Vehicle stopped: 0 km/h (0 mph)
-
Steering Angle
Steering sensor / Min.:
-3072°, Max.: 3070.5°
Left turn: Increases
Right turn: Decreases
-
Power Supply
Voltage
Power supply voltage /
Min.: 0 V, Max.: 50 V
Always: 11 to 14 V
-
Indicator Light
Control State
Outer rear view mirror
indicator dimming state /
Dim OFF or Dim ON
Dim OFF: Indicator not dimmed
Dim ON: Indicator dimmed
-
HV Flag
Hybrid vehicle / OFF or ON
OFF: Non-hybrid vehicle
ON: Hybrid vehicle
-
VGRS Flag
VGRS installed / OFF or ON
OFF: VGRS not installed
ON: VGRS installed
-
PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM...
TESTER DISPLAY
MEASUREMENT
ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
Beam Axis
Inspection
Completeness
Flag
Compl
Incompl: Inspection not completed
Compl: Inspection completed
Changes to Compl when
Test Mode has been
entered.
Destination
Undefined Flag
Destination determination /
Unfixed or Fixed
Unfixed: Sensor destination
information not determined
Fixed: Sensor destination
information determined according
to CAN destination information
-
Angle Adjustment
by Auto
Alignment
Angle adjusted using auto
alignment / Min.: Under
-12.8 deg, Max.: Over 12.7
deg
Angle adjusted using auto
alignment is displayed
When the adjusted angle is
12.7 degrees or more,
"Over 12.7" is displayed
and when it is -12.8
degrees or less, "Under
-12.8" is displayed
Setting of
Warning
Indicator Current
(Dim OFF)
when not dimmed / Min.: 0
mA, Max.: 100 mA
Always: 0 to 100 mA
-
Setting of
Warning
Indicator Current
(Dim ON)
when dimmed / Min.: 0
mA, Max.: 100 mA
Always: 0 to 100 mA
-
Mirror LED Duty
Ratio (Blinking)
blinking / Min.: 0%, Max.:
100%
Always: 50%
-
Buzzer Control
Frequency
spot monitor buzzer) when
sounding / Min.: 1000 Hz,
Max.: 2400 Hz
Always: 2400 Hz
-
Max.: 255
When system is normal: 0
When a malfunction is detected:
More than 0
-
PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM...
Last Modified: 9-16-2014
6.6 S
Doc ID: RM000004RRX01LX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: DIAGNOSTIC TROUBLE CODE CHART;
2015 MY Tundra [08/2014 - ]
DIAGNOSTIC TROUBLE CODE CHART
Blind Spot Monitor System
DTC CODE
DETECTION ITEM
SEE PAGE
C1A45
Vehicle Speed Sensor
C1A47
Steering Angle Sensor
C1AB0
Short to +B in Outer Mirror Indicator(Master)
C1AB1
Short to +B in Outer Mirror Indicator(Slave)
C1AB2
Short to GND in Outer Mirror Indicator(Master)
C1AB3
Short to GND in Outer Mirror Indicator(Slave)
C1AB4
Open in Outer Mirror Indicator(Master)
C1AB5
Open in Outer Mirror Indicator(Slave)
C1AB6
Blind Spot Monitor Master Module
C1AB7
Blind Spot Monitor Slave Module
C1AB8
Destination Information Undefined
C1ABB*
Blind Spot Monitor Master Module Beam Axis Inspection Incomplete
C1ABC*
Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete
C1ABD
Short to +B in Buzzer
C1ABE
Short to GND or Open in Buzzer
C1AC1
Master Module Horizontal Axis Misalignment
C1AC2
Slave Module Horizontal Axis Misalignment
U0100
Lost Communication with ECM / PCM "A"
U0126
Lost Communication with Steering Angle Sensor Module
U0129
Lost Communication with Brake System Control Module
U0142
Lost Communication with Body Control Module "B"
U0232
Lost Communication with Blind Spot Monitor Slave Module
U1331
Software Incompatibility with Body Control Module "B"
HINT:
*: Stored when a blind spot monitor sensor is replaced.
PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM:...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст