Toyota Tundra (2015 year). Manual — part 383
24. INSTALL FRONT PLANETARY GEAR ASSEMBLY
(a) Install the thrust washer and thrust needle roller bearing.
(b) Coat the thrust bearing race with petroleum jelly, and install it to the front planetary ring gear.
Thrust Needle Roller Bearing and Race Diameter:
ITEM
INSIDE
OUTSIDE
Bearing F
43.4 to 43.6 mm (1.71 to 1.72 in.)
58.0 to 58.25 mm (2.28 to 2.29 in.)
Race F
38.0 to 38.2 mm (1.49 to 1.50 in.)
56.50 to 57.0 mm (2.22 to 2.24 in.)
(c) Install the front planetary gear assembly and 1-way clutch inner
race to the case.
25. INSTALL NO. 3 BRAKE PISTON
(a) Coat 2 new O-rings with ATF, and install them to the No. 3 brake piston.
(b) Press the No. 3 brake cylinder into the No. 3 brake piston with both hands to install it.
NOTICE:
Be careful not to damage the O-rings.
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(c) Using SST and a press, compress the return spring and install
the snap ring.
SST: 09351-40010
NOTICE:
26. INSTALL NO. 3 BRAKE CYLINDER
(a) Install the No. 3 brake cylinder to the case.
27. INSTALL 1-WAY CLUTCH ASSEMBLY
(a) Install the thrust washer and 1-way clutch to the case.
28. INSTALL NO. 3 BRAKE PISTON HOLE SNAP RING
(a) Using SST, install the snap ring.
SST: 09350-30020
09350-07060
29. INSTALL NO. 3 BRAKE DISC
(a) Install the cushion plate, 4 plates, 4 discs and flange to the
case.
Install in order:
C - P - D - P - D - P - D - P - D - F
HINT:
C = Cushion plate
P = Plate
D = Disc
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
F = Flange
30. INSTALL NO. 3 BRAKE SNAP RING
(a) Using a screwdriver, install the snap ring.
31. INSTALL DIRECT CLUTCH PISTON SUB-ASSEMBLY
(a) Coat 2 new O-rings with ATF, and install them in the direct clutch piston.
(b) Install the direct clutch return spring and No. 2 clutch balancer
to the direct clutch piston sub-assembly.
(c) Press the direct clutch piston with clutch return spring and clutch balancer into the reverse clutch piston
with both hands to install them.
NOTICE:
Be careful not to damage the O-ring.
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(d) Place SST on the direct clutch balancer, and compress the return
spring with a press.
SST: 09320-89010
SST: 09350-30020
NOTICE:
Stop pressing when the spring sheet is lowered to a position 1 to
2 mm (0.0394 to 0.0787 in.) from the snap ring groove to
prevent the spring sheet from being deformed.
(e) Using SST, install the snap ring.
SST: 09350-30020
09350-07070
NOTICE:
Do not expand the snap ring excessively.
(a) Coat a new O-ring with ATF, and install it to the clutch drum.
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст