Volvo XC40 Twin Engine (2020 year). Manual in english — page 21
DRIVER SUPPORT
* Option/accessory.
359
In certain conditions the parking assistance
system may produce incorrect warning
signals that are caused by external sound
sources with the same ultrasonic frequen-
cies that the system works with.
Examples of such sources include horns,
wet tyres on asphalt, pneumatic brakes,
exhaust noises from motorcycles, etc.
Since a towbar is configured with the car's
electrical system, towbar protrusion is
included when the function measures the
distance to an object behind the car.
Related information
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
360
Symbols and messages for Park
Assist Pilot
Symbols and messages for Parking Assis-
tance System (PAS
112
) can be shown in the
driver display and/or the centre display. Here
are some examples.
Symbol
Message
Specification
The rearward parking assistance sensors are
deactivated
, so there are no acoustic warn-
ings for obstacles/objects.
Park Assist System
Sensors blocked, cleaning nee-
ded
One or more of the function's sensors are blocked - check and correct as soon as possi-
ble.
Park Assist System
Unavailable Service required
The system does not function as it should. A workshop should be contacted
A
.
A
An authorised Volvo workshop is recommended.
A text message can be cleared by briefly
pressing the
button, located in the centre
of the steering wheel's right-hand keypad.
If a message persists, contact a workshop
A
.
Related information
•
•
Limitations of Parking assistance (p. 358)
112
Park Assist System
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
}}
* Option/accessory.
361
Park assist camera
*
Park assist camera (PAC
113
) can assist the
driver when manoeuvring in tight spaces by
indicating obstacles with a camera image and
graphics in the centre display.
The park assist camera is a support function
which is activated automatically when reverse
gear is selected or manually via the centre dis-
play.
Example of camera view.
Zoom
114
- zoom in/out
360° view
*
- activates/deactivates all
cameras
PAS
115
- activates/deactivates the parking
assistance sensors
Lines
- activates/deactivates park assist
lines
Towbar
*
- activates/deactivates the tow-
bar park assist line
*
116
CTA
*
- activates/deactivates Cross Traffic
Alert
Objects/obstacles may be closer to the car
than they appear to be on screen.
WARNING
•
The parking sensors have blind spots
where obstacles cannot be detected.
•
Pay particular attention if there are
people and animals near the car.
•
Bear in mind that the front of the car
may swing out towards oncoming traf-
fic during the parking manoeuvre.
113
Park Assist Camera
114
The park assist lines are switched off when zooming in.
115
Park Assist System
116
Not available for all models and markets.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DRIVER SUPPORT
* Option/accessory.
362
WARNING
•
The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.
•
•
Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.
Related information
•
Driving support systems (p. 268)
•
Park assist camera locations and surveil-
lance areas
•
Park assist lines for park assist camera
•
Sensor fields for parking assistance sys-
tem (p. 366)
•
Activate park assist camera (p. 368)
•
Symbols and messages for Park assist
camera (p. 369)
•
Limitations for camera and radar unit
(p. 389)
•
•
Park assist camera locations and
surveillance areas
*
The Park assist cameras (PAC
117
) can display
a composite 360° view and separate views
for each of the four cameras: rear, front, left
or right camera view.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
}}
* Option/accessory.
363
360° view
*
The "field of vision" of the parking cameras with
approximate coverage area.
The
360° view
function activates all parking
cameras, whereupon the four sides of the car
are shown simultaneously in the centre dis-
play, which helps the driver to observe what is
around the car when manoeuvring at slow
speeds.
From the 360° view, each camera view can
be activated separately:
•
Press the screen for the desired “field of
vision” of the camera, e.g. on the surface
in front of/above the front camera.
A camera symbol on the cen-
tre display's car symbol indi-
cates which of the cameras is
active.
If the car is also equipped
with
Park Assist System
*
then distance to detected obstacles is illus-
trated with fields in different colours.
The cameras can be activated automatically or
manually.
Backwards
The backwards-facing camera is fitted above the reg-
istration plate.
The backward-facing camera shows a wide
area behind the car. For certain models, part
of the bumper can be seen as well as the tow-
bar in some cases.
Objects shown in the centre display may
appear slightly tilted — this is normal.
Forwards
The forwards parking camera is located in the grille.
The front camera can be helpful on an exit
road with limited visibility to the sides, e.g.
when driving out of a garage. It is active at
speeds up to 25 km/h (16 mph) - following
which, the front camera is switched off.
If the car does not reach 50 km/h (30 mph)
and the speed falls below 22 km/h (14 mph)
within 1 minute after the forward-facing cam-
era has been extinguished, the camera is reac-
tivated.
117
Park Assist Camera
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DRIVER SUPPORT
* Option/accessory.
364
The sides
The side cameras are positioned in each door mirror.
The side cameras can show what is along
each side of the car.
Related information
•
•
Activate park assist camera (p. 368)
•
Limitations for camera and radar unit
(p. 389)
Park assist lines for park assist
camera
*
The Park assist cameras (PAC
118
) indicate the
position of the car in relation to its surround-
ings by displaying lines on the screen.
Example of park assist lines
Park assist lines show the intended route for
the car's external dimensions with the current
steering wheel angle - this can facilitate paral-
lel parking, reversing into tight spaces and
when connecting a trailer.
The lines on the screen are projected as if they
were at ground level behind the car and
respond directly to steering wheel move-
ments, showing the driver the path the car will
take - also when the car is turning.
These park assist lines include the car's most
protruding parts, e.g. towbar, door mirrors and
corners.
•
When reversing with a trailer which is
not connected electrically to the car,
the park assist lines on the display
show the route the
car
will take – not
the trailer.
•
The screen shows no park assist lines
when a trailer is connected electrically
to the car's electrical system.
•
Park assist lines are not shown when
zooming in.
118
Park Assist Camera
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
}}
* Option/accessory.
365
•
Remember, that with the rear camera
view selected, the monitor only dis-
plays the area behind the car. Be
aware of the sides and front of the car
when manoeuvring in reverse.
•
The same applies vice versa - note
what happens to the rear parts of the
car when the front camera view is
selected.
•
Note that the park assist lines show
the
shortest
route. Therefore, pay extra
attention to the car's sides so that they
do not go against/over something
when the steering wheel is turned
when driving forward or that the front
sweeps against/over something when
the steering wheel is turned when
reversing.
Park assist lines in 360° view
*
360° view with park assist lines
With the 360° view, park assist lines are
shown behind, in front of and at the side of the
car (depending on the direction of travel):
•
When driving forwards: Front lines
•
When reversing: Side lines and reversing
lines
With front or rear camera selected, the park
assist lines appear regardless of the car's
direction of travel.
With one side camera selected, the park assist
lines only appear when reversing.
Towbar assist line
*
Towbar with park assist line
Towbar
- activates the towbar assist line.
Zoom
- zoom in/out.
The camera can facilitate connecting up to a
trailer by showing an assist line representing
the towbar's intended "path" to the trailer.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DRIVER SUPPORT
* Option/accessory.
366
1. Press
Towbar
(1).
> The park assist lines for the towbar's
intended "path" appear - the car's park
assist lines disappear simultaneously.
Park assist lines for both car and tow-
bar cannot be shown at the same time.
2. Press
Zoom
(2) when a more precise
manoeuvring is required.
> The camera view zooms in.
Related information
•
•
Park assist camera locations and surveil-
lance areas
•
Limitations for camera and radar unit
(p. 389)
•
Sensor fields for parking
assistance system
If the car is equipped with the Parking Assis-
tance System (PAS
119
) then the distance is
shown in the Parking Assistance Camera
(PAC
120
) 360° view with coloured fields for
each sensor that registers an obstacle.
Sensor fields backwards and forwards
The screen can show coloured sensor fields on the
car symbol.
The fields for the sensors for forwards and
reverse change colour as the distance to the
119
Park Assist System
120
Park Assist Camera
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
367
obstacle decreases – from AMBER through
ORANGE to RED.
Field colour
reverse
Distance in metres
(feet)
Yellow
0.6-1.5 (2.0-4.9)
Orange
0.3–0.6 (1.0–2.0)
Red
0-0.3 (0-1.0)
Field colour
forwards
Distance in metres
(feet)
Yellow
0.6–0.8 (2,0–2.6)
Orange
0.3–0.6 (1.0–2.0)
Red
0-0.3 (0-1.0)
For RED sensor fields, the pulsating acoustic
signal changes over to a constant tone.
Sensor field to the sides
Warning signals depend on the intended route
of the car. When the steering wheel is turned,
therefore, there may also be a warning for
obstacles diagonally in front of or diagonally
behind the car, not just straight ahead or
directly behind.
Parking sensor sectors where obstacles can be
detected.
Left-hand side front sensor field
Obstacle sector in the car's intended route
forwards – depending on steering wheel
angle
Sector with RED field colour and inten-
sively pulsing tone
Right-hand side rear sensor field
Obstacle sector in the car's intended route
in reverse – depending on steering wheel
angle.
The colour of the side fields changes with
reduced distance to the obstacle – from
AMBER to RED.
Colour of side
fields
Distance in metres
(feet)
Yellow
0.25–0.9 (0.8–3.0)
Red
0–0.25 (0–0.8)
In the case of RED sensor fields, the acoustic
signal changes from pulsing to intensively
pulsing.
Related information
•
•
•
Park assist camera locations and surveil-
lance areas
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
368
Activate park assist camera
The park assist camera (PAC
121
) is activated
automatically when reverse gear is engaged
or manually with one of the centre display's
function buttons.
Camera view when reversing
When reverse gear is engaged, the screen
shows the 360° view if it or any of the side
views was the last used camera view, other-
wise the rear view is shown.
Camera view for manual camera
activation
Activate the parking camera
with this button in the centre
display's function view.
The screen then initially
shows the last used camera
view. However, after each
engine start, the previously shown side view is
replaced by the 360° view and the previously
shown zoomed rear view is replaced by the
rear view.
•
GREEN button indication – the function is
activated.
•
GREY button indication – the function is
deactivated.
Automatic deactivation of camera
The front view extinguishes at 25 km/h
(16 mph) to avoid distracting the driver – it
reactivates automatically if the speed drops to
22 km/h (14 mph) within 1 minute, on the con-
dition that the speed has not exceeded
50 km/h (31 mph).
Other camera views are extinguished at
15 km/h (9 mph) and not reactivated.
Related information
•
•
Limitations of Parking assistance (p. 358)
•
Limitations for camera and radar unit
(p. 389)
121
Park Assist Camera
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
}}
369
Symbols and messages for Park
assist camera
Symbols and messages for Park assist cam-
era (PAC
122
) can be shown in the driver dis-
play and/or the centre display. Here are some
examples.
Symbol
Message
Specification
The rearward parking assistance sensors are
deactivated
, so there are no acoustic warnings
and field marks for obstacles/objects.
The camera is disengaged.
Park Assist System
Sensors blocked, cleaning nee-
ded
One or more of the function's sensors are blocked - check and correct as soon as possible.
Park Assist System
Unavailable Service required
The system does not function as it should. A workshop should be contacted
A
.
A
An authorised Volvo workshop is recommended.
122
Park Assist Camera
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DRIVER SUPPORT
* Option/accessory.
370
A text message can be cleared by briefly
pressing the
button, located in the centre
of the steering wheel's right-hand keypad.
If a message persists, contact a workshop
A
.
Related information
•
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
371
Park Assist Pilot
*
Park Assist Pilot (PAP
123
) can assist the driver
to manoeuvre the car while parking. The
function can also assist with steering when
driving out from parallel parking.
The function first checks if a space is large
enough and if so then assists the driver to
steer the car into the space.
The centre display indicates with symbols,
graphics and text the various operations to be
carried out and when to do so.
WARNING
•
The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.
•
•
Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.
Related information
•
Driving support systems (p. 268)
•
Parking variants with Park Assist Pilot
•
•
Leaving parallel parking with Park Assist
Pilot
•
Limitations of Park Assist Pilot
•
Messages for Park Assist Pilot
123
Park Assist Pilot
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
* Option/accessory.
372
Parking variants with Park Assist
Pilot
*
Park Assist Pilot (PAP
124
) can be used for
both parallel and perpendicular parking.
Parallel parking
The principal of parallel parking.
The function parks the car using the following
steps:
1. A parking space is identified and meas-
ured.
2. The car is reversed into the space.
3. The car is positioned in the space by
means of driving forward/backward.
With the
Park Out
function, a parallel-parked
car can also get help from the function with
leaving the parking space.
Perpendicular parking
Principle for perpendicular parking.
The function parks the car using the following
steps:
1. A parking space is identified and meas-
ured.
2. The car is reversed into the space and
then positioned in the space by means of
driving forward/backward.
When leaving a parking space, the
Park
Out
function must only be used for a paral-
lel-parked car - it does not work for a per-
pendicular-parked car.
Related information
•
•
Leaving parallel parking with Park Assist
Pilot
124
Park Assist Pilot
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DRIVER SUPPORT
}}
* Option/accessory.
373
Using Park Assist Pilot
*
Park Assist Pilot (PAP
125
) helps the driver
park via three steps. The function can also
help the driver to leave a parking space.
This function measures space and steers the
car – the driver's job is to:
•
keep an eye on what is happening around
the car
•
follow the instructions in the centre dis-
play
•
select a gear (reverse/forward) – an
acoustic signal indicates when the driver
should change gear
•
regulate and maintain a safe speed
•
brake and stop.
Symbols, graphic and/or text appear on the
centre display when the different steps are to
be performed.
The function can be activated if the following
criteria are met once the engine has been
started:
•
No trailer is attached to the car
•
Speed is lower than 30 km/h (20 mph).
The distance between the car and parking
spaces should be 0.5–1.5 metres
(1.6–5.0 ft) while the function is searching
for a parking space.
Parking with Park Assist Pilot
The function parks the car using the following
steps:
1. A parking space is identified and meas-
ured.
2. The car is reversed into the space.
3. The car is positioned into the space - the
system may then request that the driver
changes gear and brakes.
Find and measure parking spaces
The function can be activated
in the centre display's func-
tion view.
It can also be accessed from
the camera views.
•
GREEN button indication – the function is
activated.
•
GREY button indication – the function is
deactivated.
Principle for searching before parallel parking.
Principle for searching before perpendicular parking.
Drive at a maximum of 30 km/h (20 mph)
before parking.
125
Park Assist Pilot
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DRIVER SUPPORT
374
1. Tap on the
Park In
button in the function
view or in the camera view.
> The function searches for a parking
space and checks whether it is big
enough.
2. Be prepared to stop the car when the
graphic and message on the centre dis-
play state that a suitable parking space
has been found.
> A pop-up window is shown.
3. Select
Parallel parking
or
Perpendicular
parking
and select reverse gear.
The function searches the area for parking,
displays instructions and guides the car in
on its passenger side. But if required the
car can also be parked on the driver's side
of the street:
•
Activate the direction indicator to the
driver's side - then the system
searches for a parking space on that
side of the car instead.
Reversing in to the parking space
Principle for reversing into parallel parking.
Principle for reversing into perpendicular parking.
1. Check that the area behind the car is clear,
then engage reverse gear.
2. Reverse slowly and carefully without
touching the steering wheel - and no
faster than 7 km/h (4 mph).
3. Be prepared to stop the car when instruc-
ted by the graphic and message on the
centre display.
•
Keep your hands away from the steer-
ing wheel when the function is acti-
vated.
•
Make sure that the steering wheel is
not hindered in any way and can rotate
freely.
•
To achieve optimum results - wait until
the steering wheel is fully turned
before starting to drive backward/
forward.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст