Ford Focus RS (2011 year). Instruction — part 59
Item 10
Front door latch remote control cable
1. Using a suitable screwdriver, latch the front
door lock into the closed position.
E52756
2. Detach the front door latch remote control
cable from the front door latch remote
control handle.
1. Operate the door latch remote control handle
lock to the lock position.
2. Release the remote control cable retaining
clips.
3. Detach the inner remote control cable from
the remote control handle lock lever.
E52632
1
2
3
Item 11
Front door wiring harness
1. Detach and push the front door wiring
harness into the front door.
E47360
Item 12
Front door lock actuator retaining screw
1. Detach the front door lock actuator.
1. Loosen the front door lock actuator retaining
screw.
2. Release the front door lock actuator retaining
clip.
3. Slide the front door lock actuator towards the
front of the vehicle.
E51955
1
2
3
Item 13
Front door inner panel
CAUTION: When removing the front door
inner panel, care must be taken that the
door wiring harness is not trapped or
placed under excessive strain.
Item 14
Exterior front door handle RKE
electrical connector
NOTE: Make a note of the clipping position of the
exterior front door handle RKE harness.
1. Disconnect the front door handle RKE
electrical connector and detach the wiring
G413506en
501-14-
151
Handles, Locks, Latches and Entry Systems
501-14-
151
REMOVAL AND INSTALLATION
harness from the front door handle
reinforcement.
E52074
Item 15
Front door lock cylinder position sensor
electrical connector
1. Disconnect the front door lock cylinder
position sensor electrical connector and
detach the sensor harness from the retaining
clips.
E52075
Item 16
Front door handle reinforcement
1. Detach the front door handle reinforcement
from the front door handle, lock and latch
retaining bracket.
E51956
Item 17
Front door lock cylinder actuator rod
1. Detach the front door lock cylinder actuator
rod from the front door handle reinforcement.
E51959
Item 18
Front door exterior handle remote
control cable
1. Detach the front door exterior handle remote
control cable from the front door handle
reinforcement.
1. Using a suitable flat blade screwdriver,
release the front door exterior handle remote
control cable retaining clips.
2. Slide the front door exterior handle remote
control cable off of the front door handle
reinforcement retainers.
E51957
1
1
2
G413506en
501-14-
152
Handles, Locks, Latches and Entry Systems
501-14-
152
REMOVAL AND INSTALLATION
2. Align the front door exterior handle remote
control inner cable with the slot in the front
door handle reinforcement and remove.
E51958
Installation Details
Item 13
Front door inner panel
1. Before installing the front door inner panel
retaining bolts, feed the door wiring harness
electrical connector through the front door
wiring harness hole.
Item 12
Front door lock actuator retaining screw
1. Install the front door lock actuator to the
front door.
2. Tighten the front door lock actuator retaining
screw.
Item 5
Door hinge retaining bolts
1.
Apply a coating of adhesive to the door hinge
retaining bolts.
G413506en
501-14-
153
Handles, Locks, Latches and Entry Systems
501-14-
153
REMOVAL AND INSTALLATION
Rear Door Lock Actuator
All vehicles
1. Remove the rear door trim panel.
For additional information,
refer to: Rear
Door Trim Panel - Vehicles With: Manual
Windows
(501-05 Interior Trim and
Ornamentation, Removal and Installation)
/ Rear Door Trim Panel - Vehicles With:
Power Windows
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
2. Remove the exterior rear door handle.
For additional information,
refer to: Exterior
Rear Door Handle
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
3. Remove the rear door window regulator
grommets.
E42005
Vehicles with manual windows
4. Install the window regulator handle.
• Using the rear door window regulator handle,
align the window glass clamp bolts with the
access holes.
E47331
5. Loosen the rear door window glass clamp
bolts.
TIE39521
8 Nm
6. Raise the rear door window glass.
7. Using suitable tape, secure the rear door
window glass to the rear door.
E42006
Vehicles with power windows
8. Connect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General Procedures).
G410827en
501-14-
154
Handles, Locks, Latches and Entry Systems
501-14-
154
REMOVAL AND INSTALLATION
9. Using the front door power window control
unit, align the rear door window glass clamp
bolts with the access holes.
E42005
10. Loosen the rear door window glass clamp
bolts.
TIE39521
8 Nm
11. Raise the rear door window glass.
12. Using suitable tape, secure the rear door
window glass to the rear door.
E42006
13. Disconnect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General
Procedures).
All vehicles
14. Detach and disconnect the rear door wiring
harness.
E47361
15. Remove the components in the order
indicated in the following illustration(s) and
table(s).
G410827en
501-14-
155
Handles, Locks, Latches and Entry Systems
501-14-
155
REMOVAL AND INSTALLATION
E52761
3
2
5
8 Nm
8 Nm
4
6
1
Description
Item
Rear door latch bracket retaining screw
1
Rear door latch retaining bolts
2
Rear door latch remote control cable
See Removal Detail
3
Rear door lock actuator retaining screw
See Removal Detail
See Installation Detail
4
Description
Item
Rear door wiring harness
See Removal Detail
5
Rear door inner panel
See Removal Detail
See Installation Detail
6
G410827en
501-14-
156
Handles, Locks, Latches and Entry Systems
501-14-
156
REMOVAL AND INSTALLATION
E52185
8
7
Description
Item
Rear door lock actuator
See Removal Detail
7
Exterior rear door handle remote control
cable
See Removal Detail
8
16. To install, reverse the removal procedure.
Removal Details
Item 3
Rear door latch remote control cable
1. Using a suitable screwdriver, latch the rear
door lock into the closed position.
E52756
2. Detach the rear door latch remote control
cable from the rear door latch remote control
handle.
1. Operate the door latch remote control handle
lock to the lock position.
2. Release the remote control cable retaining
clips.
G410827en
501-14-
157
Handles, Locks, Latches and Entry Systems
501-14-
157
REMOVAL AND INSTALLATION
3. Detach the inner remote control cable from
the remote control handle lock lever.
E52632
1
2
3
Item 4
Rear door lock actuator retaining screw
1. Detach the rear door lock actuator.
1. Loosen the door lock actuator retaining
screw.
2. Release the door lock actuator retaining clip.
3. Slide the door lock actuator towards the front
of the vehicle.
E51955
1
2
3
Item 5
Rear door wiring harness
1. Detach and push the rear door wiring
harness into the rear door.
E47362
Item 6
Rear door inner panel
CAUTION: When removing the front door
inner panel, do not trap or place excessive
strain on the door wiring harness.
Item 7
Rear door lock actuator
1. Detach the rear door lock actuator from the
latch support bracket.
Item 8
Exterior rear door handle remote control
cable
1. Detach the exterior rear door handle remote
control cable from the rear door lock
actuator.
1. Using a suitable flat blade screwdriver,
release the exterior rear door handle remote
control cable retaining clips.
2. Slide the exterior rear door handle remote
control cable off the rear door lock actuator
retainers.
E52187
1
1
2
2. Align the exterior rear door handle remote
control inner cable with the slot in the door
lock actuator and remove.
E52186
G410827en
501-14-
158
Handles, Locks, Latches and Entry Systems
501-14-
158
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст