Ford Galaxy / Ford S-MAX. Manual — part 475
Electronic Engine Controls - 1.8L
Duratorq-TDCi (74kW/100PS) -
Lynx/1.8L Duratorq-TDCi (92kW/125PS)
- Lynx - Clutch Pedal Position (CPP)
Sensor
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
Removal
NOTE: Removal steps in this procedure may contain installation details.
Left-hand drive vehicles
All vehicles
308-651
Installer, Clutch Master Cylinder Sensor
1. Refer to:
Battery
(414-01 Battery, Mounting and
Cables, Removal and Installation).
2.
3.
4. Remove the Special Tool(s):
308-651
Installation
1. To install, reverse the removal procedure.
Electronic Engine Controls - 1.8L Duratorq-
TDCi (74kW/100PS) - Lynx/1.8L
Duratorq-TDCi (92kW/125PS) - Lynx -
Powertrain Control Module (PCM)
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
General Equipment
Removal
Vehicles with PCM security shield
3.5 mm drill bit
Center punch
Ford diagnostic equipment
1.
NOTE: This step is only necessary when
installing a new component.
Download the PCM and throttle body configuration
information into the diagnostic tool, using the
Programmable Modules Installation routine.
General Equipment:
Ford diagnostic equipment
2. Refer to:
Battery Disconnect and Connect
(414-01
Battery, Mounting and Cables, General
Procedures).
3. Left-hand side wheel and tire.
Refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
4.
5.
6. Torque: 3 Nm
Vehicles without PCM security shield
Installation
Vehicles with PCM security shield
7. General
Equipment:
Center
punch
General
Equipment:
3.5 mm
drill bit
8.
9. Torque: 3 Nm
1. To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст