Ford Galaxy / Ford S-MAX. Manual — part 474
Electronic Engine Controls - 1.8L
Duratorq-TDCi (74kW/100PS) -
Lynx/1.8L Duratorq-TDCi (92kW/125PS)
- Lynx - Knock Sensor (KS)
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1. Remove the catalytic converter.
Refer to:
Catalytic Converter
(309-00D Exhaust
System - 1.8L Duratorq-TDCi (74kW/100PS) -
Lynx/1.8L Duratorq-TDCi (92kW/125PS) - Lynx,
Removal and Installation).
2.
NOTE: Note the position of the component
before removal.
1. Discard the nut.
Torque:
18 Nm
2. Torque: 23 Nm
3. Torque: 20 Nm
1.
CAUTION: A new component may be
supplied with a longer cable than the one
removed. Make sure that the cable cannot be
damaged or cause a noise, vibration or
harshness (NVH) concern.
NOTE: Make sure that the sensor is installed
in the same location as when removed.
NOTE: Make sure that a new component is
installed.
To install, reverse the removal procedure.
Electronic Engine Controls - 1.8L
Duratorq-TDCi (74kW/100PS) -
Lynx/1.8L Duratorq-TDCi (92kW/125PS)
- Lynx - Brake Pedal Position (BPP)
Switch—LHD FWD
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
CAUTION: Make sure that the brake pedal remains in the rest position.
Installation
CAUTION: Make sure that the brake pedal remains in the rest position.
1.
1. To install, reverse the removal procedure.
Electronic Engine Controls - 1.8L
Duratorq-TDCi (74kW/100PS) -
Lynx/1.8L Duratorq-TDCi (92kW/125PS)
- Lynx - Brake Pedal Position (BPP)
Switch—RHD FWD
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
Installation
1.
2.
CAUTION: Make sure that the brake
pedal remains in the rest position.
1.
CAUTION: Make sure that the brake
pedal remains in the rest position.
To install, reverse the removal procedure.
Electronic Engine Controls - 1.8L Duratorq-TDCi
(74kW/100PS) - Lynx/1.8L Duratorq-TDCi
(92kW/125PS) - Lynx - Clutch Pedal Position
(CPP) Switch
S-MAX/Galaxy 2006.5 (02/2006
Removal and Installation
Removal
Installation
1.
CAUTION:
Make sure
that the clutch
pedal remains
in the rest
position.
1.
CAUTION: Make sure that the clutch pedal remains
in the rest position.
To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст