Ford Galaxy / Ford S-MAX. Manual — part 33
Installation
6. Special Tool(s):
204-605
7. Special Tool(s):
204-609
8.
CAUTION: Make sure that new bolts are
installed.
1. Torque:
140 Nm
45°
2. Torque:
80 Nm
120°
Stage 1:
Stage 2:
Stage 1:
Stage 2:
1. To install, reverse the removal procedure.
2. Refer to:
Front Toe Adjustment
(204-00
Suspension System - General Information,
General Procedures).
Front Suspension - Front Stabilizer Bar
S-MAX/Galaxy 2006.5 (02/2006
Removal and Installation
Special Tool(s)
General Equipment
Removal
Vehicles with high intensity discharge headlamps
205-316A
Alignment Pins, Subframe
307-242
Remover, Transmission Fluid Cooler
308-440
Disconnect Tool, Hydraulic Line
Hydraulic press
Transmission jack
1.
CAUTION: Make sure that the steering wheel
lock is engaged.
NOTE: Make sure that the road wheels are in the
straight ahead position.
2.
3. Remove the wheel and tire on both sides.
Refer to:
Wheel and Tire
(204-04 Wheels and Tires,
Removal and Installation).
4.
All vehicles
5.
6.
7.
WARNING: Be prepared to collect escaping
fluids.
CAUTION: Make sure that all openings are
sealed.
Special Tool(s):
307-242
,
308-440
8.
CAUTION: Make sure that the ball joint ball
does not rotate.
On both sides.
9.
CAUTION: Make sure that the exhaust flexible
pipe is not forcibly bent.
Vehicles with 1.6L engine
All vehicles
Vehicles with 2.5L engine
Vehicles with 2.0L or diesel engine
10.
11.
12.
13.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст