Ford Galaxy / Ford S-MAX. Manual — part 263
Engine - 2.0L Duratorq-TDCi
(85kW/115PS) - DW/2.0L Duratorq-TDCi
(100kW/136PS) - DW/2.0L Duratorq-
TDCi (103kW/140PS) - DW, Emission
Requirements: Stage IV - Camshaft Seal
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
Removal
Installation
205-072
Universal Flange Holding Wrench
303-174
Gauge, Bolt Angle
303-293
Remover, Crankshaft Seal
303-684
Installer, Crankshaft Front Seal
1. Remove the timing belt.
Refer to:
Timing Belt
(303-01E Engine - 1.8L
Duratorq-TDCi (74kW/100PS) - Lynx/1.8L
Duratorq-TDCi (92kW/125PS) - Lynx, Removal
and Installation).
2. Special Tool(s):
205-072
3. Special Tool(s):
303-293
1. Special Tool(s):
303-684
2. Special Tool(s):
303-174
,
205-072
Torque:
20 Nm
60°
Stage 1:
Stage 2:
3. Install the timing belt.
Refer to:
Timing Belt
(303-01E Engine - 1.8L
Duratorq-TDCi (74kW/100PS) - Lynx/1.8L
Duratorq-TDCi (92kW/125PS) - Lynx, Removal
and Installation).
Engine - 2.0L Duratorq-TDCi
(85kW/115PS) - DW/2.0L Duratorq-TDCi
(100kW/136PS) - DW/2.0L Duratorq-TDCi
(103kW/140PS) - DW, Emission
Requirements: Stage IV - Timing Belt
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
General Equipment
Removal
303-1059
Alignment Peg, Crankshaft
303-393
Locking Tool, Flywheel
303-393-01
Adapter for 303-393
303-735
Alignment Peg, Camshaft
Trolley jack
1. Disconnect the battery.
Refer to:
Battery Disconnect and Connect
(414-
01 Battery, Mounting and Cables, General
Procedures).
2. Remove the accessory drive belt.
Refer to:
Accessory Drive Belt
(303-05A
Accessory Drive - 2.0L Duratec-HE
(107kW/145PS) - MI4/2.0L Duratec-HE Flex Fuel
(107kW/145PS) - MI4/2.3L Duratec-HE
(118kW/160PS) - MI4, Removal and
Installation).
3.
4.
5.
6. General Equipment:
Trolley jack
7.
8.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст