Ford Galaxy / Ford S-MAX. Manual — part 264
9. Special Tool(s):
303-735
10.
CAUTION: Make sure that the crankshaft
is not rotated while the special tool is
installed.
Special Tool(s):
303-1059
11. Special Tool(s):
303-1059
,
303-393
,
303-393-01
12.
CAUTION: Take extra care when
handling the crankshaft position (CKP) sensor
ring.
13.
Installation
1.
1.
NOTE: Make sure that a new
component is installed.
2. Torque: 56 Nm
2.
1.
NOTE: Make sure that a new
component is installed.
2.
NOTE: Make sure that a new
component is installed.
3.
NOTE: Only tighten the bolt finger tight
at this stage.
4.
CAUTION: Take extra care when
handling the crankshaft position (CKP)
sensor ring.
3.
1. Allen key, 6mm
3. Torque: 21 Nm
4. Torque: 50 Nm
5. Remove the special tools.
Special Tool(s):
303-1059
,
303-393
,
303-393-01
6. Remove the special tool.
Special Tool(s):
303-735
7.
CAUTION: Only rotate the crankshaft
clockwise.
Rotate the crankshaft 4 revolutions.
8.
NOTE: The special tool can only be installed if
the valve timing is correct.
Install the special tool.
Special Tool(s):
303-1059
9. Install the special tools.
Special Tool(s):
303-1059
,
303-393
,
303-393-01
10.
NOTE: The special tool can only be installed if
the valve timing is correct.
Install the special tool.
Special Tool(s):
303-735
11.
12. Remove the special tool.
Special Tool(s):
303-735
13. Torque: 7 Nm
14.
1.
NOTE: Only tighten the bolts finger
tight at this stage.
2. Torque: 133 Nm
15. Lower and remove the Trolley jack.
General Equipment:
Trolley jack
16. Torque: 90 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст