Ford Galaxy / Ford S-MAX. Manual — part 301
5. Torque: 28 Nm
6. Torque: 47 Nm
7.
WARNING: Make sure that these
components are installed to the noted
removal position.
Torque:
10 Nm
16 Nm
Stage 1:
Stage 2:
8.
NOTE: The gasket is to be reused unless
damaged.
Torque:
27 Nm
Installation
1.
WARNING: Extreme cleanliness must be
exercised when handling these components.
To install, reverse the removal procedure.
Material:
Silicone Sealant LB (WSE-M4G323-
A4 / 2U7J-M4G323-AA)
Engine - 2.2L Duratorq-TDCi
(129kW/175PS) - DW - Oil Cooler
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to:
Fuel Filter
(310-01D Fuel Tank and
Lines - 2.2L Duratorq-TDCi (129kW/175PS) -
DW, Removal and Installation).
Refer to:
Throttle Body
(303-04F Fuel Charging
and Controls - 2.2L Duratorq-TDCi
(129kW/175PS) - DW, Removal and Installation).
Refer to:
Accessory Drive Belt
(303-05F
Accessory Drive - 2.2L Duratorq-TDCi
(129kW/175PS) - DW, Removal and Installation).
2. Remove the air conditioning compressor and
position to one side.
3.
4.
NOTE: Make sure that a new clamp is
installed.
5.
NOTE: Make sure that a new component is
installed.
Torque:
9 Nm
6.
NOTE: Make sure that the component is
clean and free of foreign material.
NOTE: Make sure that a new component is
installed.
Torque:
10 Nm
20 Nm
Stage 1:
Stage 2:
Installation
1. To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст