Ford Galaxy / Ford S-MAX. Manual — part 714
O1: CHECK CIRCUIT VMP14 (WH/OG) FOR SHORT TO POWER
Disconnect Rear inner left parking aid sensor
C4MP14.
1
Disconnect Parking aid module C4MP01C.
2
Ignition switch in position II.
3
Measure the voltage between the parking aid module
C4MP01C pin 3, circuit VMP14A (WH/OG), harness
side and ground.
4
Is a voltage present?
Yes
REPAIR the circuit. TEST the system for normal
operation.
No
INSTALL a new rear inner left parking aid sensor.
REFER to:
Rear Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST P : DTC B1B5096 - REAR INNER LEFT PARKING AID
SENSOR - GROUND CIRCUIT OPEN OR PARKING AID SENSOR INTERNAL
FAILURE
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
P1: CHECK CIRCUIT RMP07 (GN/WH) FOR OPEN
Disconnect Rear inner left parking aid sensor
C4MP14.
1
Disconnect Parking aid module C4MP01C.
2
Measure the resistance between the parking aid
module C4MP01C pin 8, circuit RMP07A (GN/WH),
harness side and the rear inner left parking aid
sensor C4MP14 pin 3, circuit RMP07F (GN/WH),
harness side.
3
Is the resistance less than 1 Ohm?
Yes
INSTALL a new rear inner left parking aid sensor.
REFER to:
Rear Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
No
REPAIR the circuit. TEST the system for normal
operation.
PINPOINT TEST Q : DTC B1B5201 - REAR PARKING AID SPEAKER -
INTERNAL FAULT, SHORT TO GROUND OR OPEN CIRCUIT
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
Q1: CHECK CIRCUIT CMP09A (BN/BU) FOR OPEN
Disconnect Parking aid module C4MP01A.
1
Disconnect Rear parking aid speaker C4MP09.
2
Measure the resistance between the parking aid
module C4MP01A pin 10, circuit CMP09A (BN/BU),
harness side and the rear parking aid speaker
C4MP09 pin 1, circuit CMP09A (BN/BU), harness side.
3
Is the resistance less than 1 Ohm?
Yes
GO to Q2
.
No
REPAIR the circuit. TEST the system for normal
operation.
Q2: CHECK CIRCUIT RMP09A (BU/GN) FOR OPEN
Measure the resistance between the parking aid
module C4MP01A pin 2, circuit RMP09A (BU/GN),
harness side and the rear parking aid speaker
C4MP09 pin 2, circuit RMP09A (BU/GN), harness side.
1
Is the resistance less than 1 Ohm?
Yes
INSTALL a new rear parking aid speaker. TEST the
system for normal operation. If the concern persists,
INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
No
REPAIR the circuit. TEST the system for normal
operation.
PINPOINT TEST R : DTC B1B5212 - REAR PARKING AID SPEAKER - SHORT
TO POWER
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
R1: CHECK CIRCUIT CMP09A (BN/BU) FOR SHORT TO POWER
Disconnect Parking aid module C4MP01A.
1
Disconnect Rear parking aid speaker C4MP09.
2
Ignition switch in position II.
3
Measure the voltage between the parking aid module
C4MP01A pin 10, circuit CMP09A (BN/BU), harness
side and ground.
4
Is a voltage present?
Yes
REPAIR the circuit. TEST the system for normal
operation.
No
GO to R2
.
R2: CHECK CIRCUIT RMP09A (BU/GN) FOR SHORT TO POWER
Measure the voltage between the parking aid module
C4MP01A pin 2, circuit RMP09A (BU/GN), harness
side and ground.
1
Is a voltage present?
Yes
REPAIR the circuit. TEST the system for normal
operation.
No
INSTALL a new rear parking aid speaker. TEST the
system for normal operation. If the concern persists,
INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST S : DTC B1B5301 - FRONT PARKING AID SPEAKER -
INTERNAL FAULT, SHORT TO GROUND OR OPEN CIRCUIT
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
S1: CHECK CIRCUIT CMP08 (GY/BN) FOR OPEN
Disconnect Parking aid module C4MP01B.
1
Disconnect Front parking aid speaker C2MP08.
2
Measure the resistance between the parking aid
module C4MP01B pin 4, circuit CMP08A (GY/BN),
harness side and the front parking aid speaker
C2MP08 pin 1, circuit CMP08B (GY/BN), harness side.
3
Is the resistance less than 1 Ohm?
Yes
GO to S2
.
No
REPAIR the circuit. TEST the system for normal
operation.
S2: CHECK CIRCUIT RMP08 (VT/OG) FOR OPEN
Measure the resistance between the parking aid
module C4MP01B pin 3, circuit RMP08A (VT/OG),
harness side and the front parking aid speaker
C2MP08 pin 2, circuit RMP08B (VT/OG), harness side.
1
Is the resistance less than 1 Ohm?
Yes
INSTALL a new front parking aid speaker. TEST the
system for normal operation. If the concern persists,
INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
No
REPAIR the circuit. TEST the system for normal
operation.
PINPOINT TEST T : DTC B1B5312 - FRONT PARKING AID SPEAKER -
SHORT TO POWER
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
T1: CHECK CIRCUIT CMP08 (GY/BN) FOR SHORT TO POWER
Disconnect Parking aid module C4MP01B.
1
Disconnect Front parking aid speaker C2MP08.
2
Ignition switch in position II.
3
Measure the voltage between the parking aid module
C4MP01B pin 4, circuit CMP08B (GY/BN), harness
side and ground.
4
Is a voltage present?
Yes
REPAIR the circuit. TEST the system for normal
operation.
No
GO to T2
.
T2: CHECK CIRCUIT RMP08 (VT/OG) FOR SHORT TO POWER
Measure the voltage between the parking aid module
C4MP01B pin 3, circuit RMP08A (VT/OG), harness
side and ground.
1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст