Ford Galaxy / Ford S-MAX. Manual — part 626
Vehicles with fuel fired booster heater
Vehicles with diesel engine
All except vehicles with diesel engine
All vehicles
General Equipment:
Wooden Block
18.
19. Refer to:
Quick Release Coupling
(310-00 Fuel
System - General Information, General
Procedures).
20. Refer to:
Quick Release Coupling
(310-00 Fuel
System - General Information, General
Procedures).
21. Refer to:
Quick Release Coupling
(310-00 Fuel
System - General Information, General
Procedures).
Installation
Vehicles with diesel engine
22.
23. Special Tool(s):
310-069
Torque:
85 Nm
24.
CAUTION: Take extra care not to
damage the fuel tank level sensor float and
arm.
25. Drain the fuel tank.
General Equipment:
Fuel tank draining
equipment
1. To install, reverse the removal procedure.
2.
CAUTION: Take extra care not to
damage the fuel tank level sensor float and
arm.
NOTE: Make sure that the seal is correctly
located.
NOTE: Make sure that the installation marks
are aligned.
3. Refer to:
Fuel System Bleeding - 1.8L Duratorq-
TDCi (Lynx) Diesel
(310-00 Fuel System -
General Information, General Procedures).
Refer to:
Fuel System Bleeding - 2.0L Duratorq-
TDCi (DW) Diesel
(310-00 Fuel System - General
Information, General Procedures).
Refer to:
Fuel System Bleeding - 2.2L Duratorq-
TDCi (DW) Diesel
(310-00 Fuel System - General
Information, General Procedures).
Fuel Tank and Lines - 2.2L Duratorq-TDCi
(129kW/175PS) - DW - Fuel Tank Filler
Pipe
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to:
Petrol and Petrol-Ethanol Fuel Systems
Health and Safety Precautions
(100-00 General
Information, Description and Operation).
Refer to:
Diesel Fuel System Health and Safety
Precautions
(100-00 General Information,
Description and Operation).
2. Drain the fuel tank.
Refer to:
Fuel Tank Draining
(310-00 Fuel
System - General Information, General
Procedures).
3. Remove the right-hand rear wheel and tire.
Refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
4.
5. Torque: 10 Nm
6.
7.
NOTE: Note the orientation of the clamp to
aid installation.
1. Torque: 10 Nm
2. Discard the fuel tank filler pipe clamp.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст