Ford Galaxy / Ford S-MAX. Manual — part 121
17.
NOTE: The special tool may only be installed
if the valve timings are correct.
Install the special tool.
Special Tool(s):
303-376B
18. Remove the special tool.
Special Tool(s):
303-376B
19. Remove the special tool.
Special Tool(s):
303-748
20.
21. Torque: 20 Nm
22. Special Tool(s):
303-499
Torque:
12 Nm
23. Apply a small bead of sealant to the areas
shown.
Material:
Silicone Sealant LB (WSE-M4G323-A4 /
2U7J-M4G323-AA)
24.
NOTE: If the gaskets are not damaged, re-
use them.
Torque:
10 Nm
25. Torque: 10 Nm
26. Torque: 10 Nm
27.
28. Install the auxiliary drive belt.
Refer to: Antriebsriemen - Zusatzaggregate
(303-05A Antrieb - Zusatzaggregate - 2.0L
Duratec-HE (MI4), Removal and Installation).
Engine - 2.0L Duratec-HE (107kW/145PS)
- MI4/2.0L Duratec-HE Flex Fuel
(107kW/145PS) - MI4 - Engine
S-MAX/Galaxy 2006.5 (02/2006-)
Removal
Special Tool(s)
General Equipment
303-122
Lifting Bracket, Engine
310-137
Disconnect Tool, Fuel Line
3.5 mm drill bit
Center punch
Hose clamp remover/installer
Hydraulic jib crane
Mounting table set
Retaining Strap
Schlitzschraubendreher
1. General Equipment:
Schlitzschraubendreher
2. Refer to:
Cooling System Draining, Filling and
Bleeding
(303-03A Engine Cooling - 2.0L Duratec-
HE (107kW/145PS) - MI4/2.0L Duratec-HE Flex
Fuel (107kW/145PS) - MI4/2.3L Duratec-HE
(118kW/160PS) - MI4, General Procedures).
3. Remove the following items:
1. Refer to:
Accessory Drive Belt
(303-05A
Accessory Drive - 2.0L Duratec-HE
(107kW/145PS) - MI4/2.0L Duratec-HE Flex
Fuel (107kW/145PS) - MI4/2.3L Duratec-HE
(118kW/160PS) - MI4, Removal and
Installation).
2. Remove the right-hand headlamp.
Refer to:
Headlamp Assembly
(417-01
Exterior Lighting, Removal and Installation).
3. Refer to:
Battery
(414-01 Battery, Mounting
and Cables, Removal and Installation).
4.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст