Ford Falcon. Manual — part 356
415-00-3
Entertainment System — General Information
415-00-3
DIAGNOSIS AND TESTING (Continued)
Function test
Description
Auxiliary Is Auxiliary input connected
Navigation Is Navigation signal present
Sonar parking Is Sonar parking aid set
Phone Is Phone mute input enabled
Multi CD test
Checks for presence of CD’s in mechanism
DTC Chart
DTC
Description
Possible Causes
Action
B1342
ECU is faulty
Faulty Audio unit
Document and clear the DTC’s. Carry
out the self test. If the DTC is registered
again replace ICC. Test the system for
correct operation.
B1318
Battery voltage low
Low system voltage
Document and clear the DTC’s. Run
detected.
vehicle for 2 minutes. If the DTC is
registered again check / correct battery.
B2103
Antenna not
Antenna connection not
Document and clear the DTC’s. Carry
connected
made/damaged
out the self test. If the DTC is registered
again refer to Poor radio reception
symptom in the symptom chart.
B2203
CD error
CD inserted incorrectly,
Document and clear the DTC’s.
data CD inserted
Remove all CD’s then reload CD’s and
read CM (continuously monitored)
DTC’s. If the DTC is registered again
refer to CD does not play symptom in
the symptom chart.
B2403
Multi CD mechanical CD stuck etc.
Document and clear the DTC’s.
error
Remove all CD’s then reload 6 CD’s
and play each momentarily. Read CM
DTC’s. If the DTC is registered again
refer to Unable to load / eject CD’s
(multi player ) symptom in the symptom
chart
B2404
Audio steering wheel Audio steering wheel
Document and clear the DTC’s. Read
switches faulty
switch jammed
CM DTC’s If the DTC is registered
again refer to Steering wheel audio
switch not operating symptom in the
symptom chart.
B2406
Single CD
CD stuck etc.
Document and clear the DTC’s.
mechanical error
Remove and then reload CD. Read CM
DTC’s. If the DTC is registered again
refer to Unable to load / eject CD’s
(single player ) symptom in the
symptom chart.
B2408
Speaker line short
Detects speaker line
Document and clear the DTC’s. Carry
shorted to ground or B+
out the self test. If the DTC is registered
again refer to One or more speakers not
operating symptom in the symptom
chart.
B2409
AM tuner fault
No AM signal (Antenna
Document and clear the DTC’s. Carry
test)
out the self test. If the DTC is registered
again refer to Poor radio reception
symptom in the symptom chart.
G68759 en
415-00-4
Entertainment System — General Information
415-00-4
DIAGNOSIS AND TESTING (Continued)
DTC
Description
Possible Causes
Action
B2410
FM tuner fault
No FM signal (antenna
Document and clear the DTC’s. Carry
test)
out the self test. If the DTC is registered
again refer to Poor or no radio reception
symptom in the symptom chart.
B2924
Audio button stuck
Audio button jammed
Document and clear the DTC’s. Read
CM DTC’s. If the DTC is registered
again refer to Audio button not working
symptom in the symptom chart.
B2922
Auxiliary button stuck Auxiliary button jammed Document and clear the DTC’s. Read
CM DTC’s. If the DTC is registered
again refer to the following symptoms in
the symptom chart of ICC diagnostics
413-08.
Traction button not working.
Trip / Reset button no working.
Interior lamp button not working.
Lock/Unlock button not working.
B2925
Subwoofer speaker
Subwoofer line shorted
Document and clear the DTC’s. Read
short
to ground or B+
CM DTC’s. If the DTC is registered
again refer to Subwoofer not working
symptom in the symptom chart.
U2014
Audio subwoofer not
Subwoofer
Document and clear the DTC’s. Carry
connected
disconnected/not fitted
out the self test. If the DTC is registered
again refer to Subwoofer not working
symptom in the symptom chart.
B2923
Climate control
Climate control button
Document and clear the DTC’s. Read
button stuck.
jammed.
CM DTC’s. If the DTC is registered
again refer to Climate control button not
working symptom in the symptom chart
of ICC diagnostics 413-08.
B2911
Trip computer data
Instrument cluster did
Document and clear the DTC’s. Read
invalid.
not have valid data
DTC’s. If the DTC is registered again
available.
referto instrument cluster section
413-01.
U1900
CAN communication
CAM messages not
Document and clear the DTC’s. Read
fault.
received.
DTC’s. If the DTC is registered again
referto CAN bus diagnostics section
303-14.
U2201
Ambient temperature HIM did not have valid
Document and clear the DTC’s. Read
data invalid.
data available.
DTC’s. If the DTC is registered again
refer toRefer to HIM section 412-00.
Symptom Chart
Condition
Source
Action
Low system voltage
Service Procedure: Audio Button not
Audio button not working.
Internal fault
working. (Test A)
Internal fault
Service Procedure: Navigation not
Navigation not working.
Remote control fault
working. (Test J)
Navi module fault
Wiring fault
Internal fault
Service Procedure: Telephone input
Telephone input not working
Wiring fault
not working. (Test K)
Telephone fault
G68759 en
415-00-5
Entertainment System — General Information
415-00-5
DIAGNOSIS AND TESTING (Continued)
Condition
Source
Action
Input fault
Service Procedure: Auxiliary input not
Auxiliary input not working
Wiring fault
working. (Test L)
Source fault
Internal fault
Service Procedure: Sonar not
Sonar not operating
Wiring fault
operating. (Test M)
ICC not correctly configured
Sonar module fault
Internal fault
Service Procedure: ICC does not
ICC does not turn on
Wiring fault
operate. (Test E)
Speaker fault
Antenna fault
Internal fault
Service Procedure: Single CD player
Unable to load/eject CDs ( Single CD )
Faulty CDs
mechanical fault (Test B)
Internal fault
Service Procedure: CD focus error
CD does not play
Faulty CD
(Test D)
Internal fault
Service Procedure: Poor radio
Poor or no radio reception
Wiring fault
reception (Test H)
Antenna fault
Internal fault
Service Procedure: Speaker fault (Test
One or more speakers not operating
Speaker fault
G)
Wiring fault
Internal fault
Service Procedure: Subwoofer fault
Subwoofer not working
Wiring fault
(Test F)
Amplifier fault
Speaker fault
Steering Wheel audio switch not
Internal fault
Service Procedure: Audio steering
Wiring fault
operating
wheel switch not functioning (Test I)
Switch fault
Command
Description
PID Chart
MODE_SW
Mode Switch
Command
Description
NAV_PRES
Navigation
CCNT
Number of Continuous Trouble
REVRS_INP
Reverse
Codes Set
MENU_SW
Menu switch
NTCSDT
Number of Trouble Codes Set due
CLK_DSPL
Clock Display Enable Status
to Diagnostic Test
PHONE_AT
Phone Transceiver Active
AUD_VOL
Audio Volume
VOLI_SW
Volume Increase Switch
AUSTCRES
Audio Steering Switch Circuit
Resistance
VOLD_SW
Volume Decrease Switch
AUTO_VCG
Automatic Volume Control Gain
TUNE_UP
Tune Increase Switch
ATNN_RSS
Antenna Reception Signal Strength
TUNE_DN
Tune Decrease Switch
AUDIO_SI
Audio Security Identification
SEEK_UP
Seek Increase Switch
LCD_SEG
LCD Segment Display
PLUS_SW
(+) Switch
SEC_STAT
Security Status
AM_SWT
AM Switch
ACM_STAT
ECU Operating State
FM_SWT
FM Switch
MOD_ID
Module ID Check
CD_SWT
CD Switch
CONPROV
Configuration and Programming
AUTO_SW
Autoset
Version
EJECT_SW
Eject
CANDSV
CAN Diagnostic Specification
PRE1_SW
Preset 1 Switch
Version
PRE2_SW
Preset 2 Switch
VOL_UP
(+) Volume button
PRE3_SW
Preset 3 Switch
VOL_DN
(-) Volume button
PRE4_SW
Preset 4 Switch
SEEK_BTN
(+) Seek button
G68759 en
415-00-6
Entertainment System — General Information
415-00-6
DIAGNOSIS AND TESTING (Continued)
Command
Description
Command
Description
PRE5_SW
Preset 5 Switch
CD_SLOT6
CD in slot 6
PRE6_SW
Preset 6 Switch
CD_SLOT5
CD in slot 5
POWER_SW
Power Switch
CD_SLOT4
CD_SLOT4
SUB_AMP
Subwoofer Amplifier
CD_SLOT3
CD in slot 3
VID_SRC
Video Source
CD_SLOT2
CD in slot 2
AUD_SR
Audio Source
CD_SLOT1
CD in slot 1
CLK_ODV
Clock Overlay Display on Video
RUN_POS
Run
LOAD_SW
Load Switch pressed
ACC_POS
ACC Position
LOUD_SW
Loudness Switch pressed
Service Procedures
Service Procedure
Description
Audio button not working (Test A)
Tests the ICC audio switches for correct operation
and identifies a fault.
Single CD player mechanical fault (Test B)
Tests the loading, ejection and operation of the single
CD player and identifies a fault.
Multi CD player mechanical fault (Test C)
Tests the loading, ejection and operation of the multi
CD player and identifies a fault.
CD focus error (Test D)
Tests single and multi CD players for correct
operation and identifies a fault.
ICC does not operate (Test E)
Identifies a fault when the ICC does not operate.
Subwoofer fault (Test F)
Tests the subwoofer system for correct operation and
identifies a fault.
Speaker fault (Test G)
Tests the speaker system for correct operation and
identifies a fault.
Poor radio reception (Test H)
Tests for poor radio reception and identifies a fault.
Audio steering wheel switch not functioning (Test I)
Tests the audio steering wheel switches for correct
operation and identifies a fault.
Navigation not working (Test J)
Tests for connection of the navigation system to the
ICC and tests the remote control operation.Identifies
faults.
Telephone input not working (Test K)
Checks the telephone input function and identifies a
fault.
Auxiliary input not working (Test L)
Tests the auxiliary input function and identifies a fault.
Sonar not operating (Test M)
Tests for operation of the sonar function in a vehicle
with sonar fitted and identifies a fault.
TEST A : AUDIO BUTTON NOT WORKING
Using the WDS data logger function activate the following acronyms.
RUN_POS, ACC_POS, POWER_SW, VOLI_SW, VOLD_SW, SEEK_BTN, MENU_SW, TUNE_UP,
TUNE_DN, AM_SWT, FM_SWT, CD_SWT, AUTO_SW, PRE1_SW, PRE2_SW, PRE3_SW, PRE4_SW,
PRE5_SW, PRE6_SW, LOUD_SW, LOAD_SW, EJECT_SW
Test Step
Result/Action to Take
Acronyms
A1
Turn the ignition on.
Yes
RUN_POS
Check pid’s using data logger.
Go to A2
Is the ignition on?
No
Repair faulty ignition
system and retest.
G68759 en
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст