Ford Falcon. Manual — part 357
415-00-7
Entertainment System — General Information
415-00-7
DIAGNOSIS AND TESTING (Continued)
Test Step
Result/Action to Take
Acronyms
A2
Check that the accessories are on..
Yes
ACC_POS
Check pid’s using data logger
Go to A3
Are the accessories on?
No
Repair faulty ignition
system and retest
A3
Check to see if the ICC audio is turned on.
Yes
Is the audio on?
Go to A5
No
Go to A4
A4
Push the ICC audio power button.
Yes
POWER_SW
Check pid’s using data logger.
Go to A5
Does the ICC audio turn on?
No
Go to ICC does not turn
on symptom in the
symptom chart.
A5
Operate each audio switch / knob.
Yes
Are any switches / knobs sticking or stuck?
Replace ICC and retest.
No
Continue.
A6
Check that each audio switch / knob operates.
Yes
POWER_SW,
Check pid’s using data logger.
Go to A7
VOLI_SW,
Does each audio switch / knob operate?
No
VOLD_SW,
Replace ICC and retest.
SEEK_BTN,
MENU_SW,
TUNE_UP,
TUNE_DN,
AM_SWT,
FM_SWT,
CD_SWT,
AUTO_SW,
PRE1_SW,
PRE2_SW,
PRE3_SW,
PRE4_SW,
PRE5_SW,
PRE6_SW,
LOUD_SW,
LOAD_SW,
EJECT_SW
A7
Control the following Pid’s using the WDS data
Yes
As per acronym
logger function.
Go to A8
list step A6.
Check for correct function operation for each switch No
/ knob.
Replace ICC and retest.
Do all functions operate?
G68759 en
415-00-8
Entertainment System — General Information
415-00-8
DIAGNOSIS AND TESTING (Continued)
Test Step
Result/Action to Take
Acronyms
A8
Check that the ICC function for each audio switch
Yes
operates correctly.
No fault. ICC functioning
Do all functions operate?
correctly.
No
Replace ICC and retest.
TEST B : SINGLE CD PLAYER MECHANICAL FAULT
Using the WDS data logger function activate the following acronyms.
RUN_POS, ACC_POS, POWER_SW, CD_SWT, EJECT_SW, CD_SLOT1
Test Step
Result/Action to Take
Acronyms
B1
Turn the ignition on.
Yes
RUN_POS
Check pid’s using data logger.
Go to B2
Is the ignition on?
No
Repair faulty ignition
system and retest.
B2
Check that the accessories are on.
Yes
Check pid’s using data logger.
Go to B3
Are the accessories on?
No
Repair faulty ignition
system and retest.
B3
Check to see if the ICC audio is turned on.
Yes
Is the audio on?
Go to B5
No
Go to B4
B4
Push the ICC audio power button.
Yes
POWER_SW
Check pid’s using data logger.
Go to B5
Does the ICC audio turn on?
No
Go to ICC does not turn
on symptom in the
symptom chart.
B5
Push the CD button.
Yes
CD_SWT
Check pid’s using data logger.
Go to B6
Does the CD button operate?
No
Replace ICC and retest.
B6
Check that the ICC displays "no CD" when the CD
Yes
button is pressed.
Go to B9
Does the ICC display "no CD"
No
Go to B7
B7
Press the ICC eject button.
Yes
EJECT_SW
Check pid’s using data logger.
Go to B8
Does the CD eject button operate?
No
Replace ICC and retest.
G68759 en
415-00-9
Entertainment System — General Information
415-00-9
DIAGNOSIS AND TESTING (Continued)
Test Step
Result/Action to Take
Acronyms
B8
Check to see if the CD ejected when the eject
Yes
CD_SLOT1
button was pressed.
Go to B9
Check pid’s using data logger.
No
Did the CD eject?
Replace ICC and retest.
B9
Insert a known good original genuine CD.
Yes
CD_SLOT1
Ensure that the CD is inserted with the label facing
Go to B10
up.
No
Check pid’s using data logger.
Replace the ICC and
Is the CD inserted?
retest.
B10
Check that the CD plays correctly.
Yes
Does the CD play correctly?
Go to B11
No
Go to CD does not play
symptom in the symptom
chart.
B11
Press the ICC eject button.
Yes
EJECT_SW
Check pid’s using data logger.
Go to B12
Does the CD eject button operate?
No
Replace ICC
B12
Check to see if the CD ejected when the eject
Yes
CD_SLOT1
button was pressed.
No fault. ICC functioning
Check pid’s using data logger.
correctly.
Did the CD eject?
No
Replace ICC and retest.
TEST C : MULTI CD PLAYER MECHANICAL FAULT
Using the WDS data logger function activate the following acronyms.
RUN_POS, ACC_POS, POWER_SW, CD_SWT, EJECT_SW, LOAD_SWT, CD_SLOT1, CD_SLOT2,
CD_SLOT3, CD_SLOT4, CD_SLOT5, CD_SLOT6, PRE6_SW
Test Step
Result/Action to Take
Acronyms
C1
Turn the ignition on.
Yes
RUN_POS
Check pid’s using data logger.
Go to C2
Is the ignition on?
No
Repair faulty ignition
system and retest.
C2
Check that the accessories are on.
Yes
ACC_POS
Check pid’s using data logger.
Go to C3
Are the accessories on?
No
Repair faulty ignition
system and retest.
C3
Check to see if the ICC audio is turned on.
Yes
Is the audio on?
Go to C5
No
Go to C4
G68759 en
415-00-10
Entertainment System — General Information
415-00-10
DIAGNOSIS AND TESTING (Continued)
Test Step
Result/Action to Take
Acronyms
C4
Push the ICC audio power button.
Yes
POWER_SW
Check pid’s using data logger.
Go to C5
Does the ICC audio turn on?
No
Go to ICC does not turn
on symptom in the
symptom chart.
C5
Push the CD button.
Yes
CD_SWT
Check pid’s using data logger.
Go to C6
Does the CD button operate?
No
Replace ICC and retest.
C6
Check that the ICC displays "NO DISC" when the
Yes
CD button is pressed.
Go to C9
Does the ICCdisplay "NO DISC"
No
Go to C7
C7
Press the ICC eject button.
Yes
EJECT_SW
Check pid’s using data logger.
Go to C8
Does the CD eject button operate?
No
Replace ICC and retest.
C8
Eject all CD’s from the ICC.
Yes
CDSLOT1,
Check pid’s using data logger.
Go to C9
CDSLOT2,
Did all CD’s eject?
No
CDSLOT3,
Replace ICC and retest.
CDSLOT4,
CDSLOT5,
CDSLOT6
C9
Press the ICC load button.
Yes
LOAD_SW,
Check pid’s using data logger.
Go to C9
PRE6_SW
Does the CD load button operate?
No
Replace ICC
C10
Load 6 known good original genuine CD’s.
Yes
CDSLOT1,
Ensure that the CD’s are inserted with the label
Go to C11
CDSLOT2,
facing up.
No
CDSLOT3,
Check pid’s using data logger.
Replace the ICC and
CDSLOT4,
Did all CD’s load?
retest.
CDSLOT5,
CDSLOT6
C11
Check that all CD’s play correctly.
Yes
Do all the CD’s play correctly?
Go to C12
No
Go to CD does not play
symptom in the symptom
chart.
C12
Press the ICC eject button.
Yes
EJECT_SW
Check pid’s using data logger.
Go to C13
Does the CD eject button operate?
No
Replace ICC and retest.
G68759 en
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст