Ford F-450 (2022 year). Manual in english — page 29

E162800

2. Slide the wheel partially under the

vehicle and install the retainer through
the wheel center. If equipped, you may
have to remove the wheel center cap
prior to pushing the retainer through
the center of the wheel. To remove the
center cap, press it off with the lug
wrench tip from the inner side of the
wheel. Pull on the cable to align the
components at the end of the cable.

3. Reinsert the lug wrench extension(s)

through the rear bumper and guide
tube and turn the lug wrench clockwise
until the tire is raised to its stowed
position underneath the vehicle. The
wrench will become harder to turn and
the spare tire winch will ratchet or slip
when the tire is raised to maximum
tightness. You will hear a clicking sound
from the winch indicating that the tire
is properly stowed, tighten until a
minimum of three clicks are heard.
Check that the tire lies flat against the
frame and is secure.

4. Carefully place all tools back in the tool

kit bag.

5. Reinstall the tool kit bag and tighten

the wing nut.

6. Properly reinstall the jack into the

bracket and tighten the wing nut.

WHEEL NUTS

WARNING:

When you install a

wheel, always remove any corrosion, dirt
or foreign materials present on the
mounting surfaces of the wheel or the
surface of the wheel hub, brake drum or
brake disc that contacts the wheel. Make
sure to secure any fasteners that attach
the rotor to the hub so they do not
interfere with the mounting surfaces of
the wheel. Installing wheels without
correct metal-to-metal contact at the
wheel mounting surfaces can cause the
wheel nuts to loosen and the wheel to
come off while your vehicle is in motion,
resulting in loss of vehicle control,
personal injury or death.

lb.ft (Nm)

1

Bolt Size

150 lb.ft (204 Nm)

M14 x 1.5

1

Torque specifications are for nut and bolt

threads free of dirt and rust. Use only our
recommended replacement wheel nuts
and or wheel bolts.

Retighten the wheel nuts to the specified
torque within 100 mi (160 km) after any
wheel disturbance, such as tire rotation,
changing a flat tire or wheel removal.

On vehicles equipped with dual rear
wheels, retighten the wheel lug nuts to the
specified torque at 100 mi (160 km), and
again at 500 mi (800 km) of new vehicle
operation and after any wheel disturbance,
such as tire rotation, changing a flat tire,
or wheel removal.

It is important to follow the proper wheel
mounting and lug nut torque procedures.

465

Changing a Road Wheel

E145950

Hub pilot bore.

A

Inspect the wheel pilot hole and
mounting surface prior to installation.
Remove any visible corrosion or loose
particles.

466

Changing a Road Wheel

ENGINE SPECIFICATIONS - 6.2L

6.2L V8 Engine

Engine

379 in³ (6,210 cm³)

Displacement.

Minimum 87 octane

Required fuel.

1-5-4-8-6-3-7-2

Firing order.

Coil on plug

Ignition system.

0.041 in (1.04 mm) - 0.047 in (1.2 mm)

Spark plug gap.

9.8:1

Compression ratio.

Drivebelt Routing

E163761

ENGINE SPECIFICATIONS - 6.7L DIESEL

6.7L V8 Diesel Engine

Engine

406 in³ (6,651 cm³)

Displacement.

Ultra Low Sulfur Diesel up to B20

Required fuel.

1-3-7-2-6-5-4-8

Firing order.

15.8:1

Compression ratio.

467

Capacities and Specifications

Drivebelt Routing

Single Alternator

E299020

Dual Alternator

E299021

ENGINE SPECIFICATIONS - 7.3L

7.3L V8 Engine

Engine

445 in³ (7,293 cm³)

Displacement.

Minimum 87 octane

Required fuel.

1-5-4-8-6-3-7-2

Firing order.

Coil near spark plug with spark plug wire

Ignition system.

0.049 in (1.25 mm) - 0.053 in (1.35 mm)

Spark plug gap.

10.5:1

Compression ratio.

468

Capacities and Specifications

Drivebelt Routing

Single Alternator

E305075

Drivebelt closest to the engine.

A

Drivebelt furthest from the
engine.

B

Dual Alternator

E298579

Drivebelt closest to the engine.

A

Drivebelt furthest from the
engine.

B

MOTORCRAFT PARTS - 6.2L

Motorcraft Part number

Component

FA-1950

Air filter element.

BXT-65-650

Battery (XL).

BXT-65-750

Battery (all except XL).

FP-79

Cabin air filter.

FL-820-S

Engine oil filter.

1

SP-526

Spark plugs.

2

FT-188

Six-speed automatic transmission fluid
filter (6R100).

469

Capacities and Specifications

Motorcraft Part number

Component

FT-221

Ten-speed automatic transmission fluid
filter (10R140).

WW-2248

Windshield wiper blades.

1

If a Motorcraft® oil filter is not available, use an oil filter that meets industry performance

specification SAE/USCAR-36/USC-D.

2

For spark plug replacement, contact your authorized dealer. Replace the spark plugs at

the recommended intervals. See

Normal Scheduled Maintenance

(page 628).

We recommend Motorcraft® parts that are available at your authorized dealer or at
www.fordparts.com. These parts are engineered for your vehicle, and meet or exceed our
specifications. Use of other parts could impact vehicle performance, emissions and
durability. Your warranty could be void for any damage related to use of other parts.

470

Capacities and Specifications

MOTORCRAFT PARTS - 6.7L DIESEL

Motorcraft Part number

Component

FA-2031

Air filter.

FA-1952

Foam pre-filter.

BXT-65-750

Battery (two required).

FP-92

Cabin air filter.

FL-2051-S

Engine oil filter.

1

FD-4625AA

Fuel filter.

FT-221

Ten-speed automatic transmission fluid
filter (10R140).

WW-2248

Windshield wiper blades.

1

If a Motorcraft® oil filter is not available, use an oil filter that meets industry performance

specification SAE/USCAR-36.

We recommend Motorcraft® parts that are available at your authorized dealer or at
www.fordparts.com. These parts are engineered for your vehicle, and meet or exceed our
specifications. Use of other parts could impact vehicle performance, emissions and
durability. Your warranty could be void for any damage related to use of other parts.

471

Capacities and Specifications

MOTORCRAFT PARTS - 7.3L

Motorcraft Part Number

Component

FA-1950

Air filter element.

BXT-65-750

Battery.

FP-79

Cabin air filter.

FL-820-S

Engine oil filter.

1

SP-589

Spark plugs.

FT-221

Ten-speed automatic transmission fluid
filter (10R140).

WW-2248

Windshield wiper blades.

1

If a Motorcraft® oil filter is not available, use an oil filter that meets industry performance

specification SAE/USCAR-36.

We recommend Motorcraft parts that are available at your authorized dealer or at
www.fordparts.com. We engineer these parts for your vehicle to meet or exceed our
specifications. Use of other parts could impact vehicle performance, emissions and
durability. Your warranty could be void for any damage related to use of other parts.

472

Capacities and Specifications

ENGINE OIL CAPACITY AND
SPECIFICATION - 6.2L

Use oil that meets the defined
specification and viscosity grade.

If you do not use oil that meets the defined
specification and viscosity grade, it could
result in:
•

Component damage that your vehicle
warranty does not cover.

•

Longer engine cranking periods.

•

Increased emission levels.

•

Reduced vehicle performance.

•

Reduced fuel economy.

E142732

An oil that displays this symbol conforms
to current engine, emission system and
fuel economy performance standards of
ILSAC.

We recommend Motorcraft motor oil for
your vehicle. If Motorcraft oil is not
available, use motor oils of the
recommended viscosity grade that display
the API Certification Mark for gasoline
engines.

Do not use supplemental engine oil
additives because they are unnecessary
and could lead to engine damage that your
vehicle warranty does not cover.

Capacities

Including the Oil Filter

Variant

7.0 qt (6.6 L)

All.

Materials

Specification

Name

WSS-M2C961-A1

Motorcraft® SAE 5W-30 Synthetic Blend Motor
Oil(U.S.)
Motorcraft® SAE 5W-30 Super Premium Motor Oil
/ Huile moteur de très haute qualité SAE 5W-30
Motorcraft®(Canada)
XO-5W30-Q1SP(U.S.)
CXO-5W30-LSP6(Canada)

473

Capacities and Specifications

Alternative Engine Oil for
Extremely Cold Climates

To improve engine cold start performance,

we recommend that you use the following
alternative engine oil in extremely cold
climates, where the ambient temperature
reaches -22°F (-30°C) or below.

Materials

Specification

Name

WSS-M2C963-A1

Engine Oil - SAE 0W-30 - Synthetic Blend

E240523

ENGINE OIL CAPACITY AND
SPECIFICATION - 6.7L DIESEL

Use oil that meets the defined
specification and viscosity grade.

If you do not use oil that meets the defined
specification and viscosity grade, it could
result in:
•

Component damage that your vehicle
warranty does not cover.

•

Longer engine cranking periods.

•

Increased emission levels.

•

Reduced vehicle performance.

•

Reduced fuel economy.

Engine Oil

We recommend Motorcraft motor oil for
your vehicle. If Motorcraft motor oil is not
available, use motor oil of the
recommended viscosity grade that meets
our specification WSS-M2C171-F1. You can
find the list of approved motor oils at
www.motorcraft.com.

Do not use supplemental engine oil
additives because they are unnecessary
and could lead to engine damage that your
vehicle warranty does not cover.

474

Capacities and Specifications

The use of correct oil viscosities for diesel
engines is important for satisfactory
operation. Determine which oil viscosity
best suits the temperature range you
expect to encounter for the next service
interval from the SAE Viscosity Grades
chart.

Note:

An engine block heater is

recommended at temperatures below -9°F
(-23°C).

E327351

475

Capacities and Specifications

Capacities

Including the Oil Filter

Variant

13.0 qt (12.3 L)

All.

Materials

Specification

Name

WSS-M2C171-F1

Motorcraft® SAE 10W-30 Super Duty Diesel Motor
Oil(U.S.)
Motorcraft® Super Duty Motor Oil SAE 10W-30 /
Huile moteur Super Duty SAE 10W-30 Motor-
craft®(Canada)
XO-10W30-QSDF(U.S.)
CXO-10W30-LSD12(Canada)

Alternative Engine Oil for
Extremely Cold Climates

To improve engine cold start performance,
we recommend that you use the following
alternative engine oil in extremely cold
climates, where the ambient temperature
reaches -22.0°F (-30°C) or below.

Materials

Specification

Name

WSS-M2C171-F1

Engine Oil - SAE 0W-40

Alternative Engine Oil for Biodiesel
Fuel Blends (B20 Max)

476

Capacities and Specifications

Materials

Specification

Name

WSS-M2C171-F1

Motorcraft® SAE 5W-40 Full Synthetic Diesel Motor
Oil(U.S.)
(Canada)
XO-5W40-5Q3SD(U.S.)

WSS-M2C171-F1

Motorcraft® SAE 15W-40 Super Duty Diesel Motor
Oil(U.S.)
Motorcraft® Super Duty Motor Oil SAE 15W-40 /
Huile moteur Super Duty SAE 15W-40 Motor-
craft®(Canada)
XO-15W40-QSDF(U.S.)
CXO-15W40-LSD12(Canada)

Alternative Engine Oil for Severe
Duty Service

Materials

Specification

Name

WSS-M2C171-F1

Motorcraft® SAE 5W-40 Full Synthetic Diesel Motor
Oil(U.S.)
(Canada)
XO-5W40-5Q3SD(U.S.)

ENGINE OIL CAPACITY AND
SPECIFICATION - 7.3L

Use oil that meets the defined
specification and viscosity grade.

If you do not use oil that meets the defined
specification and viscosity grade, it could
result in:
•

Component damage that your vehicle
warranty does not cover.

•

Longer engine cranking periods.

•

Increased emission levels.

•

Reduced vehicle performance.

•

Reduced fuel economy.

E142732

An oil that displays this symbol conforms
to current engine, emission system and
fuel economy performance standards of
ILSAC.

477

Capacities and Specifications

We recommend Motorcraft motor oil for
your vehicle. If Motorcraft oil is not
available, use motor oils of the
recommended viscosity grade that display
the API Certification Mark for gasoline

engines.

Do not use supplemental engine oil
additives because they are unnecessary
and could lead to engine damage that your
vehicle warranty does not cover.

Capacities

Including the Oil Filter

Variant

8.0 qt (7.57 L)

All.

Materials

Specification

Name

WSS-M2C961-A1

Motorcraft® SAE 5W-30 Synthetic Blend Motor
Oil(U.S.)
Motorcraft® SAE 5W-30 Super Premium Motor Oil
/ Huile moteur de très haute qualité SAE 5W-30
Motorcraft®(Canada)
XO-5W30-Q1SP(U.S.)
CXO-5W30-LSP6(Canada)

Alternative Engine Oil for
Extremely Cold Climates

To improve engine cold start performance,
we recommend that you use the following
alternative engine oil in extremely cold
climates, where the ambient temperature
reaches -22°F (-30°C) or below.

Materials

Specification

Name

WSS-M2C963-A1

Engine Oil - SAE 0W-30 - Synthetic Blend

478

Capacities and Specifications

E240523

COOLING SYSTEM CAPACITY
AND SPECIFICATION - 6.2L

Use coolant that meets the defined
specification.

If you do not use coolant that meets the
defined specification, it could result in:
•

Component damage that your vehicle
warranty does not cover.

•

Reduced vehicle performance.

Capacities

Quantity

Variant

24.6 qt (23.3 L)

All.

Materials

Specification

Name

WSS-M97B57-A2

Motorcraft® Yellow Prediluted Antifreeze/
Coolant(U.S.)
Motorcraft® Yellow Prediluted Antifreeze/Coolant
/ Antigel/liquide de refroidissement prédilué jaune
Motorcraft®(Canada)
VC-13DL-G(U.S.)
CVC-13DL-G(Canada)

479

Capacities and Specifications

COOLING SYSTEM CAPACITY
AND SPECIFICATION - 6.7L
DIESEL

Use coolant that meets the defined
specification.

If you do not use coolant that meets the
defined specification, it could result in:
•

Component damage that your vehicle
warranty does not cover.

•

Reduced vehicle performance.

Note:

An engine block heater is

recommended at temperatures below-9°F
(-23°C).

Capacities

Quantity

Variant

31.7 qt (30 L)

Primary cooling system.

8.1 qt (7.7 L)

Secondary cooling system.

Materials

Specification

Name

WSS-M97B57-A2

Motorcraft® Yellow Prediluted Antifreeze/
Coolant(U.S.)
Motorcraft® Yellow Prediluted Antifreeze/Coolant
/ Antigel/liquide de refroidissement prédilué jaune
Motorcraft®(Canada)
VC-13DL-G(U.S.)
CVC-13DL-G(Canada)

COOLING SYSTEM CAPACITY
AND SPECIFICATION - 7.3L

Use coolant that meets the defined
specification.

If you do not use coolant that meets the
defined specification, it could result in:
•

Component damage that your vehicle
warranty does not cover.

•

Reduced vehicle performance.

Capacities

Quantity

Variant

22.5 qt (21.3 L)

All.

480

Capacities and Specifications