Ford Fiesta (2011 year). Manual — part 162
10. • Liftgate
• Rear Door
• Rear Lamp
• Rear Bumper
• Rocker Panel Trim
• Rear Seat Cushion
• Rear Bumper Cover
• Rear Wheel Arch Trim
•
Refer to: Liftgate Trim Panel
(501-05 Interior
Trim and Ornamentation, Removal and
Installation).
Refer to: Rear Quarter Trim Panel
(501-05
Interior Trim and Ornamentation, Removal
and Installation).
Refer to: C-Pillar Trim Panel - 4-Door
(501-05
Interior Trim and Ornamentation, Removal
and Installation).
Refer to: C-Pillar Trim Panel - 5-Door
(501-05
Interior Trim and Ornamentation, Removal
and Installation).
Refer to: Loadspace Trim Panel - 4-Door
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
Refer to: Loadspace Trim Panel - 5-Door
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
Refer to: Back Panel and Reinforcement -
4-Door
(501-30 Rear End Sheet Metal
Repairs, Removal and Installation).
Refer to: Back Panel and Reinforcement -
5-Door
(501-30 Rear End Sheet Metal
Repairs, Removal and Installation).
• General Equipment: Measurement and
Alignment Angle System
• Reposition the carpeting and the wiring
harness away from the working area.
G1209232en
501-30-
89
Rear End Sheet Metal Repairs
501-30-
89
REMOVAL AND INSTALLATION
201
Rear Side Member Section
General Equipment
Air Body Saw
Metal Inert Gas (MIG) Welding Equipment
General Equipment
Resistance Spotwelding Equipment
Spot weld drill Bit
Removal
G1209233en
501-30-
90
Rear End Sheet Metal Repairs
501-30-
90
REMOVAL AND INSTALLATION
201
1.
Liftgate
•
• Rear Lamp
• Rear Bumper
• Rear Wheel Arch Trim
• Tank Filler Flap and Tank Filler
•
Refer to: Liftgate Trim Panel
(501-05 Interior
Trim and Ornamentation, Removal and
Installation).
Refer to: Rear Quarter Trim Panel
(501-05
Interior Trim and Ornamentation, Removal
and Installation).
Refer to: Loadspace Trim Panel - 4-Door
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
Refer to: Loadspace Trim Panel - 5-Door
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
4-Door
(501-30 Rear End Sheet Metal
Repairs, Removal and Installation).
Refer to: Back Panel and Reinforcement -
5-Door
(501-30 Rear End Sheet Metal
Repairs, Removal and Installation).
• Reposition the carpeting and the wiring
harness away from the working area.
2.
General Equipment: Air Body Saw
•
E115416
3.
General Equipment: Spot weld drill Bit
•
E115417
G1209233en
501-30-
91
Rear End Sheet Metal Repairs
501-30-
91
REMOVAL AND INSTALLATION
Refer to: Back Panel and Reinforcement -
201
4.
General Equipment: Air Body Saw
•
E115418
Installation
1. NOTE: Before resistance spot welding of body
panels with a total panel thickness of 3 mm and
greater, the manufacturer's welding equipment
instructions and sub-section 501-25 must be
followed.
Refer to: Tools and Equipment for Body Repairs
(501-25 Body Repairs - General Information,
Description and Operation).
2. NOTE: Sealer or adhesive must not be applied
in welding zones. Areas which were bonded or
sealed needs to be thoroughly sealed
afterwards.
Refer to: Sealer, Underbody Protection Material
and Adhesives
(501-25 Body Repairs -
General Information, Description and
Operation).
3.
General Equipment: Metal Inert Gas (MIG)
Welding Equipment
•
E115419
G1209233en
501-30-
92
Rear End Sheet Metal Repairs
501-30-
92
REMOVAL AND INSTALLATION
201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст