Chery B14. Manual — part 29
![](/vehicles/ndiex/dieramowean/hano/edan.png)
5 Disassembly/assembly of front ashtray
5.1 Disassembly steps
5.1.1 Disassemble central control panel
(Refer to disassembly steps for central control panel)
5.1.2 Unscrew 4 front ash tray fixing screws, take off ash
tray.
Installation torque: 1.5±0.5Nm
5.2 Assembly steps
The installing steps are reverse to those for removal.
6 Disassembly/assembly of glove box
6.1 Disassembly steps
6.1.1 Disassemble 2 engine hood opening handle fixing
bolts by No. 10 spanner.
6.1.2 Disassemble engine hood opening cable
6.1.3 Disassemble glove box and separate rear plugs (for
meters brightness and headlamp brightness); disassemble
AC interior temperature fixing screw and take off glove
box.
![](/vehicles/ndiex/dieramowean/hano/dig.png)
6.1.4 Disassemble 2 codriver side glove box fixing screws
and take off codriver side glove box.
Installation torque is 2±0.5Nm
6.2 Assembly steps
The installing steps are reverse to those for removal.
7 Disassembly/assembly of combined instrument
7.1 Disassembly steps
7.1.1 Prize combined instrument side trim plate by
screwdriver carefully.
7.1.2 Unscrew combined instrument 3 outside frame fixing
screws by cross head screwdriver.
7.1.3 Take off combined instrument outside frame
![](/vehicles/ndiex/dieramowean/hano/ayodyore.png)
7.1.4 Disassemble 3 fixing screws which fix combined
instrument and instrument panel main body by cross head
screwdriver.
Installation torque is 1.5±0.5 Nm
7.1.4 Unplug 2 combined instrument rear plug and
take off the combined instrument.
7.2 Assembly steps
The installing steps are reverse to those for removal.
8 Disassembly of steering wheel
8.1 Disassembly steps
8.1.1 Prize two caps beside of steering wheel.
8.1.2 Use TORX T40 disassemble 2 air bag fixing bolts.
Installation torque is 1.6±2Nm
8.1.3 Take away air bag
![](/vehicles/ndiex/dieramowean/hano/rdads.png)
8.1.4 Unplug horn plug
8.1.5 Disassemble steering wheel fixing nut by No.22
sleeve.
Installation torque is 30±3 Nm
8.1.6 Pull the steering wheel out by extractor.
8.2 Assembly steps
The installing steps are reverse to those for removal.
9 Disassembly/assembly of headlamp combined
switch, wiper switch, ignition switch, coil cable
(Please refer to disassembly/assembly of
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст