Chery Tiggo 5 (T21). Manual — part 201
17–
58
17
Installation
1. Install the reverse idler gear shaft locating bolt.
a. Install the reverse idler gear shaft locating bolt (arrow)
to the transmission case.
(Tightening torque: 40 ± 4 N·m)
2. Install the gear shift mechanism locating bolt.
HINT:
Apply thread adhesive to thread before installation.
a. Install the gear shift mechanism locating bolt (arrow)
to the transmission case.
(Tightening torque: 35 ± 5.25 N·m)
3. Install the back-up light switch.
HINT:
Apply thread adhesive to thread before installation.
a. Install the back-up light switch (arrow) to the
transmission case.
(Tightening torque: 20 ± 2 N·m)
RT21171080
RT21170180
RT21170190
17–
59
17
4. Install the shift shaft locating bolt.
HINT:
Apply thread adhesive to thread before installation.
a. Install the shift shaft locating bolts (1) to the
transmission case.
(Tightening torque: 35 ± 5.25 N·m)
1
RT21171070
17–
60
17
Transmission Case
Disassembly
1. Remove the differential bearing outer race.
a. Secure the bearing outer race puller joint (1) to the
bearing outer race (2).
b. Install the puller (1) to the bearing outer race remover
(2), and pull out bearing outer race (3) with the puller.
CAUTION
Use the same removal procedures for the differential bearing out race of transmission case and clutch
case and the oil seal.
The oil seal cannot be reused. After removal, it must be replaced.
RT21171090
2
1
1
3
2
RT21172000
17–
61
17
2. Remove the drive shaft oil seal.
a. Using a flat tip screwdriver (1), pry out the drive shaft
oil seal (2).
3. Remove the input shaft oil seal.
a. Using a flat tip screwdriver (1), pry out the input shaft
oil seal (2).
4. Remove the output shaft bearing outer race.
a. Secure the output shaft end bearing outer race puller
joint (1) to the output shaft bearing outer race (2).
1
2
RT21172010
1
2
RT21172020
1
2
RT21172030
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст