Chery Tiggo 5 (T21). Manual — part 402
35–
83
35
Inspection
1. Check rear dome light assembly.
a. Connect battery positive (+) to terminal 2 of rear dome
light assembly, and battery negative (-) to terminal 1.
Check operation of rear dome light when turn rear
dome light assembly switch to ON, OFF and DOOR
position.
Standard Condition:
Switch ON: Does not come on.
Switch OFF: Does not come on.
Switch DOOR: Comes on.
If result is not as specified, replace rear dome light
assembly.
Installation
Installation is in the reverse order of removal.
RT21350350
1 2
-
+
35–
84
35
Front Door Courtesy Light
Removal
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the front door protector assembly. (
4. Remove the front door courtesy light.
a. Disconnect the front door courtesy light wire harness
connector (arrow).
b. Turn the front door courtesy light counterclockwise,
and remove it from front door protector assembly.
Installation
Installation is in the reverse order of removal.
RT21350360
RT21470311
35–
85
35
High Mounted Stop Light Assembly
Removal
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the back door protector assembly (
).
4. Remove the high mounted stop light assembly.
a. Disconnect the high mounted stop light assembly wire
harness connector (arrow).
b. Remove the rear spoiler assembly (
c. Remove 3 fixing nuts (arrow) from high mounted stop
light assembly.
(Tightening torque: 3.5 ± 0.5 N·m)
d. Remove the high mounted stop light assembly from rear spoiler assembly.
Installation
Installation is in the reverse order of removal.
RT21350370
RT21480542
35–
86
35
License Plate Light Assembly
Removal
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the license plate light assembly.
a. Using a flat tip screwdriver wrapped with protective
tape, pry out the license plate light assembly.
b. Disconnect the license plate light assembly wire
harness connector (arrow).
c. Remove the license plate light assembly.
Installation
Installation is in the reverse order of removal.
RT21350380
RT21350390
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст