Chery Tiggo. Manual — part 56
11. Installation is in the reverse order of removal.
Installation Notes:
• Rotate the camshaft pulley and align the timing
marks (1) with the cylinder head cover.
• Rotate the crankshaft pulley and align the timing
marks (1) with the front cover.
ON-VEHICLE SERVICE
LTSM020049
LTSM020073
LTSM020074
• Rotate the lower balance shaft pulley and align the
timing marks (1) with the front cover.
• Remove the plug from the cylinder block and then
insert a holder (1) (8 mm diameter) into the hole.
NOTE :
If the holder can be inserted more than 60 mm, then the timing marks are aligned. If the holder could not be inserted
more than 20-25 mm, the lower balance shaft pulley should be rotated one revolution and the timing marks should
be then be aligned. Keep the holder installed until the installation of the timing belt is complete.
• Make sure all timing marks are aligned properly.
• Install the timing belt.
ON-VEHICLE SERVICE
LTSM020075
LTSM020174
LTSM020076
02
• Using special tool MD-998767 (1) and a torque
wrench, adjust the timing belt tensioner.
• Measure distance “A” between the tensioner arm
and the automatic tensioner.
− Standard distance is 3.84 mm
Inspection
1. Inspect the timing belt back rubber for signs of
aging and glistening.
ON-VEHICLE SERVICE
LTSM020078
LTSM020080
LTSM020057
2. Inspect the timing belt for the following:
• Cracks in the back rubber (1).
• Cracks and stripping in the canvas (2).
• Cracks in the grooves (3).
• Cracks in the side of the belt (4).
3. Inspect the timing belt (1) for abnormal abrasion in
the side of the belt (2).
4. Inspect the timing belt for abnormal abrasion (2) or
teeth missing (1) from the belt.
ON-VEHICLE SERVICE
LTSM020058
LTSM020059
LTSM020060
02
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст