Chery S11 / Chery QQ. Manual — part 86
Chery QQ Service Manual
(3)Be careful of sputtering iron scrap when drilling the hole.
(4)Air in the cylinder is colorless, smell-less, and nontoxic
(5)Deal with the support carefully. Do not drop paint or oil on it.
(6)When the support fully extrudes, do not turn the piston rod or cylinder.
3. Install the trunk door support
(1)Apply adhesive agent on the bolts.
(2)Install the trunk door support.
Torque: 22 N.m(225 kg-cm, 16 pound-foot).
Chery QQ Service Manual
Chapter 10 Door
Disassembly of front door
Removal of inner door panel of front door
(1)Remove set bolt on the fixed handle base
plate with cross screwdriver.
(2)Remove bolts of fixed handle with
cross screwdriver.
(3)Remove 4 set bolts of inner door panel.
- 232 -
Chery QQ Service Manual
(4)Sway the door inner door panel from top to bottom by hand, take out the inner
door panel upwards.
(5)From the rear of inner door panel, separate the connecting rod of fixed handle,
then take out the fixed handle.
(6)Disconnect the wire harness plug of central lock main switch from the rear of
door inner door panel, and then take out the base plate of door handle.
- 233 -
Chery QQ Service Manual
(7)Take out inner door panel.
Removal of Front door Horn
(1)Remove the inner door panel;
See “removal of the interior
decorative panel” for reference.
(2)Remove 4 set bolts of the horn.
(3)Remove the horn plug, take the horn out.
Removal of front indoor light
(1)Remove indoor lamp cover with flat
screwdriver.
(2)Take the indoor lamp assembly out.
- 234 -
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст