Chery Fora (Elara A520). Manual — part 4

Chery Service Manual for A520 Body Dimension and Accessories

1

CHAPTER FIVE DISASSEMBLING AND INSTALLATING THE SUN ROOF

1. STRUCTURAL DIAGRAM

1）Sun roof frame

2）Windshield frame

3）Sun roof central bracket

4）Sun roof back bracket

5）Rear roof frame

6）Car lining

7）Sun roof track

8）Sun roof module

9）Sun roof motor

10）Sun roof deflector

11）Sun roof glass

12）Guiding gutter

13）Sun visor

Chery Service Manual for A520 Body Dimension and Accessories

2

2. NECESSARY TOOLS

Cross screwdriver, internal spline wrench,
ratchet gear and ratchet rod

3. REPLACING THE SUN ROOF GLASS

3.1

Disassembling the sun roof glass

1)

Turn on the power switch to lift up the sun
roof in full tilt.

2)

Push the inner trim strip (

SIDE COVER

INNER LH/RH

) backwards to make it off.

3)

Slowly unscrew the four screws and bolts
fixing the glass.(Be sure not to make the
glass off)

4) Simply take off the glass

Chery Service Manual for A520 Body Dimension and Accessories

3

3.2

Installing the sun roof glass

1)

Turn on the power switch to operate the
sliding mechanism without glass to the
full open position, and then place the
glass in the middle of the support bar of
the sliding mechanism.

Chery Service Manual for A520 Body Dimension and Accessories

4

2)

Reinforce slightly with four bolts. And
then pull the glass forward lightly to
reinforce other bolts slightly from the
middle one by one.

3)

Turn on the power switch to operate the
sun roof to the full close position.

4)

Began to adjust the four glass fastening
screws while pulling the glass slightly
forward.

5)

Turn on the power switch to test if the
on/off operation of the sun roof is
normal. (Note: check and adjust the
height/start-up noise/collision of the
glass)

6)

Turn on the power supply switch to lift
up the glass to the full open position
again, and then stick the inner trim strip
to the support bar of the sliding
mechanism.

7)

Test the on/off operation, starting and
running operation as well as the noise of
the sun roof after installation to make
sure

that

no

abnormal

condition

existing.