Chery A18. Manual — part 68
6. Disassembly & assembly of A pillar shield
6.1. Disassembly steps
6.1.1. Unscrew bolts with the Phillips screwdriver
6.1.2. Then take out A pillar shield
6.2. Assembly steps
Assemble according to the inverted sequence of the
disassembly
7. Disassembly & assembly of side shield of the roof
7.1. Disassembly steps
7.1.1. Unscrew 2 fixing bolts with the Phillips
screwdriver and then take out the side shield of the roof
7.2. Assembly steps
Assemble according to the inverted sequence of the
disassembly
8. Disassembly & assembly of B pillar shield
8.1. Disassembly steps
8.1.1. Take out the upper shield of B pillar with the
slotted screwdriver (See the disassembly & assembly
of the safety belt).
8.1.2. Take out the down shield of B pillar with the
slotted screwdriver
Attention: Protect trim surface not to be scratched
8.2. Assembly steps
Assemble according to the inverted sequence of the
disassembly
9. Disassembly & assembly of the bottom board front storage box
9.1. Disassembly steps
9.1.1. Unscrew two side fixing bolts of the front
storage box with the Phillips screwdriver (There are 6
bolts in all and each 3 bolts at the left & right sides)
9.1.2. After unscrewing bolts, the front storage bottom
board is disassembled by hands
9.2. Assembly steps
Assemble according to the inverted sequence of the disassembly).
10. Disassembly & assembly of the roof
10.1. Disassembly steps
10.1.1. Disassemble the left & right front sunshade plates (See
the disassembly & assembly of the sunshade plate)
10.1.2. Disassemble the front ceiling lamp and then disassemble
the rear ceiling lamp (See the disassembly& assemble of the
front & rear ceiling lamp.)
10.1.3. Disassemble all the roof handrails inside of the car.
(See the disassembly & assembly of the car roof handrail)
10.1.4 Disassemble the bottom board of the front storage box
(See the disassembly & assembly of the front storage boards)
10.1.4.Disassemble shields of the A/B pillar shield & roof side
shield(See the disassembly & assembly of the A/B pillar & roof
side shield)
10.1.5. Disassemble all buckles (16) of the roof with the slotted
screwdriver
10.1.6. Open the rear door, disassemble the roof, and it is very
convenient to take out the roof and not easy to spoil the roof
10.2. Assembly steps
Assemble according to the inverted sequence of the disassembly
Chapter VII Disassembly & Assembly of the Instrument Panel
Section I Instrument panel system constitutional diagram
.
1 Bolt
14 Left air outtake of the instrument frame
27 Turning switch
2 Left support of the instrument panel
15 Wind frame assembly
28 Upper shield of combined switches
3 Bolt (with pad)
16 Self-tapping bolt of the combined instruments 29 Combined switches
4 Instrument panel assembly
17 Electronic combined instruments
30 Glove box lock assembly
5 Clip bolt
18 Fixing clamp of the central electric box
31 Glove box assembly
6 Bolt cover
19 Relay
32 Bolt
7 Central panel of the instrument panel(H) 20 Fuse
33 Glass lifting switch
8 Assembly wrapping strip
21 Left side jockey box assembly
34 Accessory panel of the instrument panel
9 Switch closure
22 Central electric box assembly
35 Clip
10 Headlamp switch
23 Self-tapping bolt
36 Controlled module support
11 Fog lamp switch
24 Down shield of the combined switches
37 Glass lifting controlled module
12 Heating switch of the rear windshield
25 Fixing bolts of combined switches
38 Glass lifting main switch
13 Instrument frame assembly
26 Wiper switch
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст