Chery A18. Manual — part 67

7. Disassembly steps of the rear tail lamp

7.1. Disassemble 3 fixing bolts of the rear tail lamp with

the wrench 8# or the Phillips screwdriver

Moment：1.5±0.2N·m

7.2. Please take out the rear holder plug by hands

7.3. Please take the lamp rear holder by hands and take out

the bulb

Attention:

Do not touch the bulb with hands when

changing the bulb or the fingerprints on the lamp will

volatile after the lamp is power-on & heated and deposit

on the mirror surface and then darken the reflector

7.4.Attention：

Assemble according to the inverted

sequence of the disassembly

Chapter VI Disassembly& assembly of the Roof

1. Preparation

Tools: Socket wrench, Phillips screwdriver and slotted screwdriver

2. Attentions

2.1. In the process of the disassembly &assembly, pay attention to

applying the suitable dynamics and forbid the careless operation.

2.2. In the process of the disassembly of the interior trim, pay

special attention to protecting the trim surface not to be scratched.

3. Disassembly & assembly of the sunshade panel

3.1. Disassembly steps

3.1.1. Please loosen 2 fixing bolts of the left front sunshade panel

with the Phillips screwdriver

Moment：3±1Nm

3.1.2. Take out the left front sunshade panel

3.2. Assembly steps

Assemble according to the inverted sequence of the disassembly

3.3. Disassemble & assemble the right front sunshade panel

according to the disassembly & assembly of the left front

sunshade panel

4. Disassembly & assembly of the roof handrail

4.1. Disassembly steps

4.1.1. Prize up the 2-side end covers of the handrail with the

slotted screwdriver

4.1.2. Unscrew left & right fixing bolts with the Phillips

screwdriver

Moment：9±3N.m

4.1.3. Take out handrails

4.2. Assembly steps

Assemble according to the inverted sequence of the disassembly

4.3. The disassembly & assembly of other handrails is according to the disassembly & assembly of

the right front handrail

5. Disassembly & assembly of the front & rear ceiling lamp

5.1. Disassembly & assembly of the front ceiling lamp

5.1.1.

Disassembly steps

5.1.1.1. Prize up the exterior frame of the front ceiling lamp

with the slotted screwdriver

Note: Not scratch the surface of the trim parts

5.1.1.2. Take out the ceiling lamp, take out the plug-in unit

of the wiring harness and disassemble the front ceiling lamp

assembly

5.1.2.

Assembly steps

Assemble according to the inverted sequence of the

5.2. Disassembly & assembly of the rear ceiling lamp

5.2.1.

Disassembly steps

5.2.1.1. Prize up the exterior frame of the rear ceiling lamp

with the slotted screwdriver

Note: Not scratch the surface of the trim parts

5.2.1.2. Take out the ceiling lamp, take out the plug-in unit

of the wiring harness and disassemble the rear ceiling lamp

assembly

5.2.2.

Assembly steps