Chery A18. Manual — part 69
Section
Disassembly & assembly of the instrument panel
Ⅱ
I. Disassembly & assembly of the instrument panel accessories
1. Preparation
Tools: Socket wrench, open-end wrench, Phillips screwdriver, slotted
screwdriver
2. Attention
2.1 Please put on necessary appliances for labor protection in order to avoid
the accident
2.2 Cut the negative electrode of the accumulator before the disassembly of
the electric apparatus
3. Disassembly & assembly of the radio & tape player
3.1. Disassembly steps
3.1.1. Disassemble the radio & tape player with the special
tool and put in the right way
3.1.2. Apply the force in parallel by hands to draw out the
radio & tape player
3.1.3. Take out the plug-in unit at the back of the radio &
tape player and take out the radio & tape player
3.2. Assembly steps
Assemble according to the inverted sequence of the disassembly
4. Disassembly & assembly of the air conditioner controlled panel
4.1. Disassembly steps
4.1.1. Prize up the shield cover of the air conditioner
controlled panel with the slotted screwdriver
4.1.2. Unscrew fixing bolts of the air conditioner
controlled panel with the Phillips screwdriver, take out the
rear plug and take out the air conditioner controlled panel.
4.2. Assembly steps
Assemble according to the inverted sequence of the
disassembly
5. Disassembly & assembly of the glove box
5.1. Disassembly steps
5.1.1. Open the cover of the glove box, and unscrew 2 bolts
at left & right side connecting with the instrument panel
with the Phillips screwdriver
5.1.2. Unscrew 2 fixing bolts on the glove box with the
Phillips screwdriver
5.1.3. Take out the glove box assembly
5.2. Assembly steps
Assemble according to the inverted sequence of the
disassembly
6. Disassembly & assembly of the combined instruments
6.1. Disassembly steps
6.1.1. Carefully prize up the air outlets at the two sides of
the combined instruments with the screwdriver
6.1.2. Unscrew under fixing bolts below the air outlet seat
with the Phillips screwdriver
6.1.3. Unscrew above fixing bolts of the air outlet seat with
the Phillips screwdriver
6.1.4. Unscrew fixing bolts connecting the combined
instrument board and instrument panel main parts with the
Phillips screwdriver
6.1.5. Unscrew fixing bolts of the right air outlet of the
combined instruments with the Phillips screwdriver
6.1.6. Take out the buttons of the front & rear fog lamps
6.1.7. Carefully prize up the switch of the fog lamp with the
slotted screwdriver
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст