Chery A18. Manual — part 70
6.1.8. Unscrew fixing bolts with the Phillips screwdriver
6.1.9. Unscrew fixing bolts at the right side with the
Phillips screwdriver
6.1.10. Unscrew fixing bolts of the combined instruments
with the Phillips screwdriver
6.1.11. Disassemble the plug at the back of the combined
instruments and take out the combined instruments
assembly
6.2. Assembly steps
Assemble according to the inverted sequence of the
disassembly
7. Disassembly & assembly of the steering wheel
Please see the disassembly part of the steering column in
8. Disassembly & assembly of combined switches, wiper switch and ignition switch
Please see the disassembly part of the steering column in the chassis service manual
II. Disassembly & assembly of the main parts of the instrument panel
1. Preparation
Tools: Socket wrench, open-end wrench, Phillips screwdriver, slotted screwdriver
2. Attention
2.1 Please put on necessary appliances for labor protection in order to avoid the
accident
2.2 Cut the negative electrode of the accumulator before the disassembly of the electric
apparatus
3. Disassembly & assembly of the main parts of the instrument panel
3.1. Disassembly steps
3.1.1. Disassemble the buttons of the headlamp switch
3.1.2. Take out the plug of the headlamp switch
3.1.3. Unscrew fixing bolts of the left holder of the instrument
panel with the Phillips screwdriver
3.1.4. Unscrew fixing bolts of the right holder of the
instrument panel with the Phillips screwdriver
3.1.5. Unscrew fixing bolts at the left down side of the main
parts of the instrument panel with the Phillips screwdriver
3.1.6. Unscrew each 2 fixing bolts at the left & right side of
the main parts of the instrument panel with the socket wrench
10#
3.1.7. Disassemble the windshield wiper motor & connecting
rod mechanism (See the disassembly & assembly of the
windshield wiper mechanism), take out 2 fixing bolts of the
instrument panel from the water trough
3.1.8. Take out the main parts assembly of the instrument
panel
3.2. Assembly steps
3.2.1.
Assemble according to the inverted sequence of
the disassembly
3.2.2.Attentions:
3.2.2.1. The double outlets of the instrument panel should
inosculate with the outlet interface of the air conditioner, and
the unsuitable assembly & air leakage phenomena is not
allowed, as well as the interaction of the instrument panel’s air
duct & evaporator, and those may affect the assembly of the
instrument panel and result the improper assembly of
instrument panel and its accessories is not allowed.
3.2.2.2. The instrument panel should not interact with the front
windshield glass, which affects its assembly when assembling
the instrument panel and the gap between the instrument panel
& front windshield is even
3.2.2.3. The gap between the instrument panel & carbody is
even & accordant and can satisfy the assembly of the doorway
sealing strip.
3.2.2.4. The glove box should be opened & closed smoothly
without interaction, seizure or with locking loosely
3.2.2.5. The assembly of the middle passage cover panel
should be firm, whose gap with console main parts, and two
sides of the handrail box should be less than 0.5mm and be
even.
3.2.2.6. The fastening moment for the tyre of the instrument
panel and fixing bolts between upper & down main parts is
5±0.5N.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст