Chery B11. Manual — part 9
Audio System
37
Fade adjusting
1.Press A-M(2) to select “FAD”
2.Turn key (11) to adjust front/rear volume
distribution. Clockwise for front
loudhailer, anti-clockwise for rear
volume.
*The value of leaving the factory is
“0”
Range of adjustment is: F12 to R12
3.Press A-M (2) for times till back to this
function mode after adjusting.
Sonority function
Sonority function can automatically
enhance bass/treble to make tone natural.
Operation for Radio
Radio reception
1.Press BAND (4) select radio mode.
2.Press BAND (4) to select waveband,
press BAND every one time, wavebands
will be switched according to below
sequence:
FM1ŽFM2"FM3"AM"FM1
3.Tune by pressing 7 7 or 8 9 to
select stations you desired.
Tune Mode
The radio has three tune mode: Scan
search tune, manual tune and presetting
tune.
Scan searching tune
1.Press BAND (4) to select the wavebands
you desired (FM or AM).
*If the “MANU” (manual) shown on
the display, please press BAND (4)
for more than one second, the
“MANU” will disappear, and you
can start scan search tune.
1. Press 7
7
or 8
9
for
Audio System
38
automatic searching.
Ÿ
Press 8 (9) scan search
stations on high frequency;
Ÿ
Press
7 (7) scan search
stations on low frequency.
Manual tune
The radio has two manual tune modes:
Quick tune and frequency tune.
When you select frequency tune mode, the
frequency changes once for a time; when
you select quick tune mode, the radio can
be quick tuned to the frequency you
desired.
1.Press BAND (4) to select waveband you
desired (FM or AM).
*If the “MANU (manual)” shown on
the display, please press BAND (4)
for more than one second, the
“MANU” will disappear, and you
can start manual tune.
2.Tune for a certain station
Ÿ
Quick tune
Press 7
7
or 8
9
for more
than 1 second to select station.
Ÿ
Frequency tune
Press 7
7
or 8
9
to select
station manually.
Call presetting station
You can pre-set 24 stations in the memory
(6 each for FM1, FM2, FM3 and AM
wavebands). The presetting keys will
choose the memorized stations’ frequency
automatically.
1.Press BAND (4) select waveband you
desired.
2.Press corresponding presetting button
(10) to select memorized station.
*Press a certain presetting button (10)
more than 2 seconds, the station will
be memorized in memory.
Manual memorize
1.Select station you desired by scan search
tune, manual tune or presetting tune.
2.Press a certain presetting button (10)
more than 2 seconds, the current station
Audio System
39
will be memorized in the memory.
Automatic memorize
Automatic memorize function can
automatically select and memorize 6
stations in sequence.If not,the original one
in the memory will not be covered up.
1.Press BAND (4) to select the station you
desired.
2.Press AS (2) more than 2 seconds, the
stations with the best reception signal will
be automatically memorized in presetting
button.
Presetting scan
Presetting scan can scan all stations
memorized in memory in sequence. This
function will be very useful when you
search the station you desired in memory.
Press PS (1) more than 2 seconds, select
the station you desired, press PS (1) again
to continue receiving this station.
Operation for Tape player
Insert tape
Insert tape. The display show “LOAD”
and start to play.
If the metal strap and chrome strap(70us)
are inserted, the tape player will choose
metal strap mode automatically.
Play inserted tape
Press TAPE (6) to select tape player mode,
the tape player start to work automatically.
If there is no tape in it, “CASS (cassette)”
will show and flash on the display.
Pause
1.Press PAUSE (8) to pause tape play, the
display show “PAUS(pause)”.
2.Press PAUSE (8) again to restart tape
play.
Audio System
40
Eject tape
Press TAPE EJECT (12) to eject the tape.
Attention:
Press TAPE EJECT (12), after “CASS”
flashing for a second, the tape player will
switch to radio mode automatically.
The antenna will extend automatically if
the audio source is connected with
automatic antenna. Please press CD CHG
(5) or TAPE (6) to switch the play mode if
the antenna touches other object in some
condition.
Tape reversing
Press PROG (6) to change program and
play.
Tape player change program
automatically(auto-reverse function), and
start to play from the tape end.
Fast forward/rewind
Ÿ
Fast forward (FF):
Press 8 (9)
Ÿ
Fast rewind (REW):
Press
7 (7)
Ÿ
Cancel FF/REW
Press PAUSE (8)
When reach tape end during fast
forward/fast rewind, the tape will
auto-reverse and start to play
automatically.
The fast forward/fast rewind will be
continued even if you choose another play
mode.
When reach tape end, the tape player will
stop fast forward/fast rewind
automatically.
This function is called “monitor mode”.
APC (Automatic process control)
function
You can skip to the beginning of next
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст